796274-1
SLD CPC PLUG ASSY,17-16,STD SX
The SLD CPC PLUG ASSY, a crucial component for your connectivity needs. This female housing features 16 socket contacts, designed for a straight orientation in a shell size 17. With a voltage rating of 600 V DC and operating temperatures ranging from -55 to 105 °C (-67 to 221 °F), this assembly ensures reliable performance in diverse environments. Crafted from UL 94V-0 rated nylon, it guarantees both durability and safety. RoHS compliant and in stock for immediate shipping, this product is a must-have for any project requiring high-quality circular power connectors.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 796274-1 |
| Color: | Black |
| Series: | AMP CPC |
| Gender: | Female |
| Housing Material: | Nylon |
| Number of Contacts: | 16 |
| Body Orientation: | Straight |
| Voltage: | 600 V DC |
| Shell Size: | 17 |
| Contact Type: | Socket |
| Number of Positions: | 16 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Shell Type: | All Plastic |
| Product: | Circular Power Connectors |
| Product Type: | Housing |
| Standards Met: | UL 94V-0 |
| Material Flammability Standard: | UL 94V-0 |
| SKU: | AMP796274-1 |
| Seal Type: | Wire Entry Seal |
| Keying: | A |
| Number of Signal Positions: | 16 |
| Reverse Numbering: | With |
| Number of Power Positions: | 0 |
| Reverse Gender: | No |
| Contact Protection: | With |
| Accepts Wire Insulation Diameter Range: | 1.65 - 3.05 mm / .065 - .12 in |
| null: | 600 VAC |
| Operating Voltage: | 600 VAC |
| Body Orientation: | Straight |
| VDE Tested: | No |
| Mating Alignment Type: | Keyed |
| Mating Retention Type: | Threaded Coupling |
| Screw and Hole Thread Size: | 15/16-20 UNEF-2A |
| Panel Mount Feature: | Without |
| Mating Alignment: | With |
| Mating Retention: | With |
| Circuit Application: | Signal |
| Shielded: | No |
| Connector and Contact Terminates To: | Wire & Cable |
| Connector System: | Wire-to-Wire |
| Sealable: | Yes |
| Connector and Housing Type: | Plug |
| Fluid Resistance: | Immersion |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 11/10/2021 | E-21-004947 - Product Improvement. Delete the existing AMP logo molded into the housing. Add a molded TE logo close to the molded part number where possible. The molded TE logo and molded part number may be located on any flange edge of receptacles or body of plugs. | Download |
| 09/08/2021 | P-22-022825 - Document clarification.TE was unable to reliably apply the laser marking during this time. These markings are considered a form change. TE eliminated the marking of the part number, date code, Mexico and AMP from the Coupling Ring of these CPC Plug Assemblies from approximately September 8, 2021 through June 30, 2022. The markings will resume on these parts beginning July 1, 2022. | Download |
| 07/05/2021 | E-21-006540 - Manufacturing / Process Requirements. The tooling used to white ink stamp is damaged and unable to be repaired or replaced. For this reason the change is being implemented immediately. Change the method of marking the contact cavity identification numbers on the wire entry end of the connector from white ink stamping to laser marking. | Download |
| 07/17/2018 | E-18-006713 - Product Improvement. Add laser marking as an option to mark the part number, date code and country of origin to the housings as needed. The markings are currently applied using ink stamping. The laser marking option has the advantage of being more permanent and easier to apply than ink. | Download |