5745173-4
CABLE CLAMP KIT,SZ 3
Part Aliases: TE Connectivity 4-36001-0619
The 5745173-4 Cable Clamp Kit, designed for shell size 3 with a two-piece RFI/EMI shield for optimal protection. With 25 positions and nickel plating over copper, this kit ensures reliable connectivity in demanding environments. Operating in a wide temperature range from -55 to 85°C (-67 to 185°F), it's suitable for various applications. Featuring a 180° cable exit angle and accommodating insulation diameters up to .35 inches (8.89 mm), it offers flexibility in cable management. Constructed with zinc alloy and RoHS compliant, this cable clamp kit guarantees durability and environmental responsibility, making it a must-have for your connectivity needs.
Product Category: | |
Manufacturer: | TE Connectivity |
Manufacturer Part Number: | TE Connectivity 5745173-4 |
Series: | AMPLIMITE Kit |
Accessory Type: | Backshell/Cable Clamp |
Shell Size: | 3 |
Clamp Type: | Two-Piece RFI/EMI Shield |
Number of Positions: | 25 |
Shield Plating Material: | Nickel over Copper |
Shield Plating Finish: | Bright |
Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
Shielded: | Yes |
Screw Hole Thread Size: | 4-40 |
Cable Exit Angle: | 180° |
Cable Insulation Diameter: | .35 in, 8.89 mm |
Grommets: | Without |
Cable Clamp Material: | Zinc Alloy |
Part Aliases: | 4-36001-0619 5745173-4 |
Jackscrew Part Number: | 747784-3 |
SKU: | AMP5745173-4 |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |
Product Change Notice
Effective Date | Description of Change | Download |
---|---|---|
12/17/2021 | P-21-021927 - Retraction of Obsolete. this PCN is to revise an error previously released on PCN numbers: P-21-021901, P-21-021902, P-21-021903, P-21-021904, P-21-021906, P-21-021907, P-21-021908, P-21-021909, P-21-021910, P-21-021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download |
10/01/2021 | P-21-020808 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download |