| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 5748676-2 |
| Series: | AMPLIMITE Kit CST |
| Accessory Type: | Backshell/Cable Clamp |
| Shell Size: | 2 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 15 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Shielded: | Yes |
| Screw Hole Thread Size: | 4-40 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | .185 - .32 in, 4.7 - 8.13 mm |
| Grommets: | With |
| Cable Clamp Material: | Zinc Alloy |
| Grommets Per Set: | 4 |
| Part Aliases: | 5748676-2 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP5748676-2 |
5748676-2
Specifications
Detailed Description
Introducing the DIE CAST CBL CLMP KIT, SZ 2 from the AMPLIMITE Kit CST series. This two-piece RFI/EMI shield clamp offers robust protection for cables with its nickel over copper plating and bright finish. Designed for 15 positions, it ensures secure and reliable cable management in high-demand environments. With a cable exit angle of 180° and accommodation for insulation diameters ranging from .185 to .32 inches, this kit guarantees versatility in installation. Each package contains 1 clamp kit, complete with zinc alloy construction and 4 grommets for added durability. Operating efficiently in temperatures ranging from -55 to 105°C, this RoHS-compliant product is a must-have for data and device applications.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-206062-4 | CABLE CLAMP KIT #11 |  |
 | TE Connectivity 1-640517-0 | 02P MR II PLUG HSG V0 RED | |
 | TE Connectivity 1658671-1 | HDP-22,PLUG,SIZE 2, 26 POSN | |
 | TE Connectivity 205089-1 | HD 20 PIN CONTACT | |
 | TE Connectivity 205204-9 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205205-2 | CRIMP SNAP RCPT ASSY,SIZE 2 | |
 | TE Connectivity 205206-9 | CRIMP SNAP PLUG ASSY,SIZE 2 | |
 | TE Connectivity 206070-8 | CABLE CLAMP KIT #17 | |
 | TE Connectivity 5205207-1 | HD RECPT ASSY SIZE 3 | |
 | TE Connectivity 5205208-1 | CRIMP SNAP PLUG ASSY, 25 POS | |
 | TE Connectivity 5745175-1 | CABLE CLAMP KIT,SZ 5 | |
 | TE Connectivity 5747223-3 | AMPLI FEM S'LOCK KIT | |
 | TE Connectivity 5748676-1 | DIE CAST CBL CLMP KIT,SZ 1 | |
 | TE Connectivity 5748676-3 | DIE CAST CBL CLMP KIT,SZ 3 | |
 | TE Connectivity 5748676-4 | DIE CAST CBL CLMP KIT,SZ 4 | |
 | TE Connectivity 5748676-5 | DIE CAST CBL CLMP KIT,SZ 5 | |
 | TE Connectivity 747784-3 | AMPLI JACKSCREW 4-40 KIT | |
 | TE Connectivity 747784-8 | JACKSCREW KIT,4-40, BULK | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 01/14/2022 | P-21-021901 - Part status change.The listed part numbers below will be discontinued and no longer available. | Download | |||
| 12/17/2021 | P-21-021927 - Retraction of Obsolete. this PCN is to revise an error previously released on PCN numbers: P-21-021901， P-21-021902， P-21-021903， P-21-021904， P-21-021906， P-21-021907， P-21-021908， P-21-021909， P-21-021910， P-21-021911， The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020809 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
| 09/01/2020 | P-20-019478 - Manufacturing Location Change. TE is dual sourcing the manufacturing location of the products listed below. Currently the listed products are being produced in the TE Hermosillo, MX. Facility. In the future, parts will be sourced from TE Hermosillo, MX and/or TE Norwood, Mass. USA. Lead times for orders on these part numbers will not be negatively impacted due to this chang | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
