| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 5745175-1 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Backshell/Cable Clamp |
| Shell Size: | 5 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 50 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
| Shielded: | Yes |
| Screw Hole Thread Size: | 4-40 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | 19.05 mm, .75 in |
| Grommets: | Without |
| Cable Clamp Material: | Die Cast |
| Part Aliases: | 5745175-1 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP5745175-1 |
5745175-1
Specifications
Detailed Description
The 5745175-1 CABLE CLAMP KIT, SZ 5, is an essential accessory for securing and protecting cables in industrial settings. With a two-piece RFI/EMI shield design, this kit ensures reliable performance and signal integrity for up to 50 cable positions. Constructed of durable die-cast material with a nickel over copper plating, it offers excellent protection against environmental factors. Featuring a 180° cable exit angle and compatibility with cables up to .75 inches in diameter, it provides versatile and efficient cable management solutions. This RoHS-compliant kit is a must-have for data and device applications, guaranteeing high-quality performance in every use case.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-206062-6 | CABLE CLAMP KIT #11 |  |
 | TE Connectivity 1658641-2 | HDP-20,PLUG,SIZE 5, 50 POSN | |
 | TE Connectivity 1658674-1 | HDP-22,PLUG,SIZE 5,78 POSN | |
 | TE Connectivity 205203-3 | CRIMP SNAP RCPT ASSY,SIZE 1 | |
 | TE Connectivity 205204-9 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205205-2 | CRIMP SNAP RCPT ASSY,SIZE 2 | |
 | TE Connectivity 5205207-1 | HD RECPT ASSY SIZE 3 | |
 | TE Connectivity 5205208-1 | CRIMP SNAP PLUG ASSY, 25 POS | |
 | TE Connectivity 5205817-1 | KIT SCREWLOCK FEMALE | |
 | TE Connectivity 5745175-2 | CABLE CLAMP KIT,SZ 5 | |
 | TE Connectivity 5747223-3 | AMPLI FEM S'LOCK KIT | |
 | TE Connectivity 5748676-1 | DIE CAST CBL CLMP KIT,SZ 1 | |
 | TE Connectivity 5748676-2 | DIE CAST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 5748676-3 | DIE CAST CBL CLMP KIT,SZ 3 | |
 | TE Connectivity 5748676-5 | DIE CAST CBL CLMP KIT,SZ 5 | |
 | TE Connectivity 745255-2 | SPRING LATCH 2/BAG | |
 | TE Connectivity 747784-3 | AMPLI JACKSCREW 4-40 KIT | |
 | TE Connectivity 747784-8 | JACKSCREW KIT,4-40, BULK | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 12/17/2021 | P-21-021927 - Retraction of Obsolete. this PCN is to revise an error previously released on PCN numbers: P-21-021901， P-21-021902， P-21-021903， P-21-021904， P-21-021906， P-21-021907， P-21-021908， P-21-021909， P-21-021910， P-21-021911， The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020808 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
