734-202

D-Sub Standard Density Connector, Machined Signal, 7.5A, Straight, Solder Cup, 9 Position, Plug, Bright Tin Shell with Grounding Dimples, 29.921μin Gold Plating

ADERENDHUELSE N BL

ULTRAFAST 250 ASSY REC 22-18 TPBR LP

UHF Straight Crimp Plug RG-8 RG-213 RG-225 Non-Constant Impedance

RF Connector F-Type Straight Crimp Jack RG-179 Belden 179DT Bulkhead Rear Mount 75 Ohm

Han® EE module, male, 8 contacts, 16 A, 400 V

Metal D-Sub Backshell, 25/44HD Positions, 180° Entry, Nortech Logo, with #4-40 x 0.5in Mating Screws (Slot Head)

The single wire DIN end sleeve insulated ferrule in white has a funnel entry for faster insertion and lower installation cost. It is intended for American Wire Gauge (AWG) #22-20 (0.5 mm²) wire ferrules and supports a maximum wire insulated diameter of 0.09 (2.5 mm). The insulated ferrule is 0.53 (13.5 mm) long and has a wire strip length of 0.469 (11.9 mm). It comes in standard packages of 500.

The single wire DIN end sleeve insulated ferrule in yellow has a funnel entry for faster insertion and lower installation cost. It is intended for American Wire Gauge (AWG) #10 (6.0 mm²) wire ferrules and supports a maximum wire insulated diameter of 0.24 (6.2 mm). The insulated ferrule is .79 (20.0 mm) long and has a wire strip length of 0.625 (15.9 mm). It comes in standard packages of 100.

The fir tree push mount assembly is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 500 and has a maximum bundle diameter of 3.0" (76.2 mm).

Orange, 2:1 Shrink Ratio, Single Wall Tubing, Shrinks To .748 in [19 mm], Irradiated Modified Polyolefin, 1.575 in [40 mm] Inner Diameter

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; 100% protected against mismating; light gray

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 8-pole; 100% protected against mismating; light gray

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.81 mm; 3-pole; 100% protected against mismating; orange

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.81 mm; 4-pole; 100% protected against mismating; orange