| Attribute | Value |
|---|---|
| Manufacturer: | Molex |
| Manufacturer Part Number: | Molex 120341-0954 |
| IP Rating: | IP67 |
| Cable Length: | 57 m |
| Jacket Material: | Plastic |
| Wire Size: | 26 AWG |
| Jacket Color: | Green |
| Current Rating: | 0.5 A |
| Voltage Rating: | 48 V |
| Operating Temperature: | -25 to 80 °C |
| Connector End A: | M12, Micro-Change |
| Connector End A Gender: | Male |
| Connector End A Number of Contacts: | 8 |
| Connector End B: | M12, Micro-Change |
| Connector End B Gender: | Male |
| Connector End B Number of Contacts: | 8 |
| SKU: | MOL120341-0954 |
120341-0954
| ICC Number: | MOL120341-0954 |
| Manufacturer: | Molex |
| Manufacturer Number: | 120341-0954 |
| ECAD Model: | |
Description:
Micro-Change (M12) CAT6A Double-Ended Cordset, 8 Poles, X-Coded, Male (Straight) to Male (Straight), 26 AWG, Green Teal Shielded TPE Cable, 57.0m (187.01') Length
Specifications
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | Molex 120066-0381 | Micro-Change (M12) Double-Ended Cordset, 4 Poles, A-Coded, Male (Straight) to Female (90°), 22 AWG, Yellow TPE Cable, 5.0m (16.40') Length |  |
 | Molex 120066-0694 | Micro-Change (M12) Double-Ended Cordset, 4 Poles, A-Coded, Male (Straight) to Female (Straight), 22 AWG, Yellow TPE Cable, 8.0m (26.25') Length | |
 | Molex 120066-0697 | Micro-Change (M12) Double-Ended Cordset, 4 Poles, A-Coded, Male (Straight) to Female (Straight), 22 AWG, Yellow TPE Cable, 15.0m (49.21') Length | |
 | Molex 120066-1044 | Micro-Change (M12) Double-Ended Cordset, 5 Poles, A-Coded, Male (Straight) to Female (Straight), 18 AWG, Yellow TPE Cable, 15.0m (49.21') Length | |
 | Molex 130064-0461 | BradPower D-Size (1 3/8â€â€“M35) Double-Ended Cordset, 4 Poles, Male (Straight) to Female (Straight), 10 AWG, Black TPE Cable, 20.0m (65.62') Length | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 06/30/2023 | 513014 - Change to Product. M12 COUPLING NUT MA/FE CHANGE TOLERANCE. Diameter tolerance change from 14.5 +0.5 to 14.5+0.3/-0.1 mm. Depending on the supplier method used, the material throw-up is sometimes somewhat larger and sometimes only very minimal. | Download | |||
