745229-2
Cut Strip - 20 DF PIN PLTD 30 SEL
Cut Strip - 20 DF PIN PLTD 30 SEL: This male Crimp Snap contact features a brass construction with Gold over Nickel plating, suitable for signal circuit applications. With a contact amperage of 3.1 A and a pin diameter of 1.02 mm, it accommodates wire sizes ranging from 18 to 22 AWG. Designed for Cable-to-Cable connections, this standard-grade contact offers reliable performance. It is RoHS compliant and features a Crimp Snap-In termination for secure installation. The termination post length is 0.391 inches, with insulation support not required. The contact is in stock for immediate shipping.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 745229-2 |
| Series: | Crimp Snap |
| Amperage: | 3.1 A |
| Gender: | Male |
| Termination Method: | Crimp |
| Contact Material: | Brass |
| Contact Plating: | Gold Over Nickel |
| Contact Size: | 20 |
| Contact Type: | Pin |
| Pin Diameter: | .04 in, 1.02 mm |
| Contact Amperage: | 3.1 A |
| Circuit Application: | Signal |
| Contact Mating Area Plating: | Gold over Nickel |
| Contact Mating Area Plating Thickness: | 30 µin |
| Contact Underplating Material: | Nickel |
| PCB Contact Termination Area Plating: | Gold Flash |
| Connector and Contact Terminate To: | Wire & Cable |
| Wire Size: | 18 - 22 AWG, .4 - .8 mm² |
| Product Grade: | Standard |
| Connector System: | Cable-to-Cable |
| Connector Product Type: | Contact |
| Termination Post Length: | .391 in |
| Wire Insulation Support: | Without |
| Post Diameter: | .085 in |
| Insulation Diameter: | .068 in |
| Contact Retention Type in Housing: | Crimp Snap-In |
| Part Aliases: | 745229-2 |
| SKU: | AMP745229-2.P |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 08/14/2020 | P-20-019450 - product improvement. we will add a PE bag and desiccant in each box at the time of packaging. there is no changes in product. only we adding PE bag & desiccant in each packing box for product improvement | Download |
| 06/26/2017 | P-17-014027 - Manufacturing Location Change. TE Connectivity (TE) is moving manufacturing location of the products listed below from TE Rock Hill to TE Guangdong. Please contact your TE Sales Engineer with questions. | Download |