| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 5747099-3 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Cable Clamp |
| Shell Size: | 2 |
| Package Quantity: | 1 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 15 |
| GPL: | 252 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Packaging: | Bag |
| Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
| Shielded: | Yes |
| GPL Description: | Data and Devices |
| Connector and Contact Terminate To: | Wire & Cable |
| Product Code: | 5884 |
| Screw Hole Thread Size: | 4-40 |
| ECCN: | EAR99 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | .375 in, 9.53 mm |
| Grommets: | Without |
| Cable Clamp Material: | Flame-Retardant Thermoplastic |
| Cable Clamp Plating: | Nickel over Copper |
| Part Aliases: | 5747099-3 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP5747099-3 |
5747099-3
Specifications
Detailed Description
Introducing the CABLE CLAMP KIT, SZ 2, a crucial accessory for secure cable management in electronic devices. This two-piece RFI/EMI shield clamp ensures reliable protection for up to 15 cables with a shell size of 2. Constructed with nickel over copper plating and a flame-retardant thermoplastic body, this clamp guarantees durability and safety. Its 180° cable exit angle accommodates various design configurations, while its compact .375-inch cable insulation diameter suits tight spaces. RoHS compliant and operating efficiently in temperatures ranging from -55 to 85°C, this Cable Clamp Kit is essential for maintaining signal integrity and reducing interference in high-speed data and device applications.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-480634-9 | 20P STR/REL HNGD BLK |  |
 | TE Connectivity 1658671-1 | HDP-22,PLUG,SIZE 2, 26 POSN | |
 | TE Connectivity 1658683-1 | HDP-22,RCPT,SIZE 3,44 POSN | |
 | TE Connectivity 202169-4 | M-SERIES HALF SHIELD KIT | |
 | TE Connectivity 205204-9 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205206-9 | CRIMP SNAP PLUG ASSY,SIZE 2 | |
 | TE Connectivity 206306-1 | 23-37 RECEPT REV SEX | |
 | TE Connectivity 206512-5 | CLAMP,CABLE SHELL,SIZE 23 | |
 | TE Connectivity 207470-1 | CABLE CLAMP KIT,SZ 2 | |
 | TE Connectivity 208101-8 | LATCH BLOCK (SZ 1-4) | |
 | TE Connectivity 3-641191-3 | 03P MTA100 CONN ASSY WHT LF | |
 | TE Connectivity 499712-1 | KEYING PLUG,NOVO RCPT | |
 | TE Connectivity 5748676-1 | DIE CAST CBL CLMP KIT,SZ 1 | |
 | TE Connectivity 5748676-2 | DIE CAST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 5748676-3 | DIE CAST CBL CLMP KIT,SZ 3 | |
 | TE Connectivity 745779-2 | HD SQZ TO RELEASE KIT | |
 | TE Connectivity 747746-1 | GROMMET ASSORT-SZ1/2 CBL CLMPS | |
 | TE Connectivity 747784-8 | JACKSCREW KIT,4-40, BULK | |
For Use With
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-745494-5 | | |
 | TE Connectivity 1-745494-6 | | |
 | TE Connectivity 745255-2 | | |
| | TE Connectivity 747746-1 | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 12/21/2021 | P-21-021935 - Retraction of Obsolete status. This PCN is to revise an error previously released on PCN numbers: P-21-021901, P-21-021902, P-21-021903,P-21-021904, P-21-021905,P-21-021906 & P-21-021907,P-21-021908& P-21-021909, P-21-021910, P-21-021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 12/21/2021 | P‐21‐021935 - Retraction of obsolete. This PCN is to revise an error previously released on PCN numbers: P‐21‐021901,P‐21‐021902,P‐21‐021903,P‐21‐021904,P‐ 21‐021905,P‐21‐021906,P‐21‐021907,P‐21‐021908,P‐21‐021909,P‐21‐021910,P‐21‐021911, The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020808 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
