| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 5745174-4 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Cable Clamp |
| Shell Size: | 4 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 37 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
| Shielded: | Yes |
| Connector and Contact Terminate To: | Wire & Cable |
| Screw Hole Thread Size: | 4-40 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | 10.8 mm, .425 in |
| Grommets: | Without |
| Cable Clamp Material: | Zinc Alloy |
| Identification Letter: | J |
| Part Aliases: | 5745174-4 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP5745174-4 |
5745174-4
Specifications
Detailed Description
Introducing the 5745174-4 Cable Clamp Kit, designed for size 4 cables with a diameter of .425 inches. This two-piece RFI/EMI shield clamp offers reliable protection for your cable connections, with a total of 37 positions for secure fastening. Constructed from durable zinc alloy with a nickel over copper plating, this clamp ensures longevity and efficient shielding performance. It is RoHS compliant and suitable for a wide range of applications, with an operating temperature range of -55 to 85°C (-67 to 185°F). Trust in the 5745174-4 for robust cable management in your projects.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-5745172-3 | AMPLI CBL CLMP KIT |  |
 | TE Connectivity 1658673-1 | HDP-22,PLUG,SIZE 4,62 POSN | |
 | TE Connectivity 205089-1 | HD 20 PIN CONTACT | |
 | TE Connectivity 205090-1 | HD 20 SOCKET CONTACT | |
 | TE Connectivity 205210-8 | PLUG ASSY SIZE 4 | |
 | TE Connectivity 556879-3 | PLUG HSG,AMPINNERGY WTB,3 POS | |
 | TE Connectivity 5745171-1 | SIZE 1 ASSY KIT .250 | |
 | TE Connectivity 5745171-5 | AMPL CBL CLMP KIT SZ 1 | |
 | TE Connectivity 5745172-2 | 15 POS STRAIN RELIEF KIT | |
 | TE Connectivity 5746881-1 | MALE SCREW RETAINER KIT | |
 | TE Connectivity 5747223-3 | AMPLI FEM S'LOCK KIT | |
 | TE Connectivity 5748676-1 | DIE CAST CBL CLMP KIT,SZ 1 | |
 | TE Connectivity 5748676-2 | DIE CAST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 5748676-3 | DIE CAST CBL CLMP KIT,SZ 3 | |
 | TE Connectivity 66504-3 | 20 DF SCKT CONT | |
 | TE Connectivity 66506-3 | 20 DF PIN | |
 | TE Connectivity 747784-3 | AMPLI JACKSCREW 4-40 KIT | |
 | TE Connectivity 794001-2 | MR RECPT AU PHBZ LP 26-24 | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 12/17/2021 | P-21-021927 - Retraction of Obsolete. this PCN is to revise an error previously released on PCN numbers: P-21-021901， P-21-021902， P-21-021903， P-21-021904， P-21-021906， P-21-021907， P-21-021908， P-21-021909， P-21-021910， P-21-021911， The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020808 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
Availability
In Stock:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |