211401-4
RECEPT,SZ 13-7,CPC
The AMP CPC Black Panel Mount Housing, featuring a straight body orientation for seamless installation. With a shell size of 13 and accommodating 7 contacts, this male connector is designed for optimal performance. Crafted from thermoplastic, it ensures durability and reliability in various applications. Meeting UL 94V-0 standards for flammability, it guarantees safety. Operating at a voltage of 600 V DC and with a contact type of pin, it offers efficient power connectivity. With a wide operating temperature range of -55 to 105 °C (-67 to 221 °F), and full RoHS compliance, this housing is a high-quality solution for your circular connector needs.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 211401-4 |
| Color: | Black |
| Series: | AMP CPC |
| Gender: | Male |
| Housing Material: | Thermoplastic |
| Number of Contacts: | 7 |
| Mount Type: | Panel Mount |
| Body Orientation: | Straight |
| Voltage: | 600 V DC |
| Shell Size: | 13 |
| Contact Type: | Pin |
| Number of Positions: | 7 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Shell Type: | All Plastic |
| Product: | Circular Power Connectors |
| Product Type: | Housing |
| Standards Met: | UL 94V-0 |
| Material Flammability Standard: | UL 94V-0 |
| SKU: | AMP211401-4 |
| Keying: | A |
| Number of Signal Positions: | 7 |
| Reverse Numbering: | Without |
| Number of Power Positions: | 0 |
| Reverse Gender: | No |
| Contact Protection: | With |
| null: | 600 VAC |
| Operating Voltage: | 600 VAC |
| Body Orientation: | Straight |
| VDE Tested: | Yes |
| Mating Alignment Type: | Keyed |
| Mating Retention Type: | Threaded Coupling |
| Screw and Hole Thread Size: | 3/4 - 20 UNEF-2A |
| Panel Mount Feature Type: | Flange with Threaded Inserts |
| Panel Mount Feature: | With |
| Mating Alignment: | With |
| Mating Retention: | With |
| Circuit Application: | Power & Signal |
| Shielded: | No |
| Connector and Contact Terminates To: | Wire & Cable |
| Connector System: | Wire-to-Wire |
| Sealable: | No |
| Connector and Housing Type: | Receptacle |
| Fluid Resistance: | None |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 11/10/2021 | E-21-004947 - Product Improvement. Delete the existing AMP logo molded into the housing. Add a molded TE logo close to the molded part number where possible. The molded TE logo and molded part number may be located on any flange edge of receptacles or body of plugs. | Download |
| 03/30/2018 | E-17-003409 - Product Improvement. Add laser marking as an option to mark the part number, date code and country of origin to housings. | Download |