| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1534594-2 |
| Amperage: | 8.75 A |
| Termination Method: | Crimp |
| Operating Temperature Range: | -40 - 150 °C, -40 - 302 °F |
| Wire Size: | .25 - .35 mm² |
| Crimp Type: | F-Crimp |
| Terminal Primary Locking Feature: | Clean Body |
| Terminal / Splice Type: | Receptacle |
| Product: | Automotive, Truck, Bus, & Off-Road Terminals |
| SKU: | AMP1534594-2 |
1534594-2
| ICC Number: | AMP1534594-2 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 1534594-2 |
| ECAD Model: | |
Specifications
Detailed Description
Introducing the MCON 1.2 CB REC SRC AU, a high-performance automotive terminal designed for reliable power transmission in demanding environments. With an amperage rating of 8.75 A, this crimp termination method ensures secure connections for optimal conductivity. Operating seamlessly in a wide temperature range from -40 to 150 °C (-40 to 302 °F), it is perfect for use in both standard and extreme conditions. Suitable for wire sizes ranging from .25 to .35 mm², the F-Crimp type with a Clean Body primary locking feature guarantees a tight and secure fit. This receptacle terminal, part of our RoHS-compliant Automotive, Truck, Bus, & Off-Road Terminals range, is a must-have for any automotive application, providing durability and performance you can trust.
Application Tooling
For Use With
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 964972-1 |  | |
 | TE Connectivity 967056-1 | | |
 | TE Connectivity 967067-1 | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 01/11/2026 | PCN-25-264941 - Material Change. Material change within the MCON 1.2 CleanBody Terminal family. The base material of the existing 0- variants will be changed from CuSn0.15 to CuSn4, resulting in the introduction of new 7- variants. This material change provides improved crimp performance, while maintaining electrical characteristics. There are no geometrical changes, and existing tooling and applicators remain fully compatible. All new versions have been fully qualified in accordance with product specification 108-18782 (including LV214 and USCAR), following TE Connectivity s standard release procedures. A phased introduction is planned, starting with lead customers and lead part numbers in EMIA in early 2026, followed by a global rollout over the subsequent time. TE Connectivity strongly recommends using the new 7-variants for all new designs and future applications, as they represent the preferred and enhanced long-term solution. | Download | |||
| 02/20/2024 | P-23-025380 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
| 02/20/2024 | P-23-025381 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
