| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 967056-1 |
| Color: | Blue |
| Series: | MQS |
| Seal Type: | Cavity Blanking Plug |
| Product: | Automotive Seals & Cavity Plugs |
| SKU: | AMP967056-1 |
| Material: | Silicone |
| Cavity Diameter: | 3.6 mm / .142 in |
| Cable Insulation Diameter: | 4.1 mm / .161 in |
| UL Flammability Rating: | None |
| Lubricant Content: | No |
| Resistance to Hydrocarbons: | Poor |
| Shore A Hardness: | 50 |
| Operating Temperature Range: | -40 - 130 °C / -40 - 266 °F |
| Part Alias: | EG9739-000,AMP-0-0967056-1 |
967056-1
Specifications
Detailed Description
Introducing the MQS BLINDSTOPFEN4MM, a crucial component for sealing automotive connectors. This blue cavity blanking plug, with the SKU 967056-1, ensures reliable performance in a variety of applications. Made with high-quality materials, this product is not only durable but also environmentally friendly with its RoHS compliance. Designed for the MQS series, it guarantees a perfect fit and seal every time. Trust in the Automotive Seals & Cavity Plugs supplier for top-notch quality. Perfect for any automotive connector accessories, this plug is a must-have for professionals in the industry. Upgrade your sealing system with the MQS BLINDSTOPFEN4MM.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1-967325-1 | 2,5MM BU-GEH 4P |  |
 | TE Connectivity 1-967616-1 | MQS BU-GEH EDS 6P | |
 | TE Connectivity 1418882-1 | COVER FOR 62POS.REC.HSG | |
 | TE Connectivity 281934-2 | SINGLE WIRE SEAL | |
 | TE Connectivity 282080-1 | AMP SUPERSEAL 1.5 SERIES 2P PL | |
 | TE Connectivity 282081-1 | RUBBER PLUG | |
 | TE Connectivity 282087-1 | AMP SUPERSEAL 1.5 SERIES 3P PL | |
 | TE Connectivity 282105-1 | AMP SUPERSEAL 1.5 SERIES 3P CA | |
 | TE Connectivity 770678-1 | SEAL PLUG, AMPSEAL | |
 | TE Connectivity 776164-1 | 35POS,AMPSEAL,SOC HSG ASSY,SLD,COD 1 | |
 | TE Connectivity 828904-1 | Automotive Seals & Cavity Plugs, Single Wire Seal (SWS), Cavity Diameter .205 in [5.2 mm], Silicone, Poor, 50, Timer Connector System | |
 | TE Connectivity 828922-1 | 2,5MM CAVITY PLUG FOR 5,4MM DI | |
 | TE Connectivity 963530-1 | EINZELLEITERDICHTNG | |
 | TE Connectivity 963531-1 | BLINDSTOPFEN | |
 | TE Connectivity 964972-1 | EINZELLEITERDICHTNG | |
 | TE Connectivity 966144-6 | DOPPLEIT ADERENDH N | |
 | TE Connectivity 967067-1 | MQS SGL WIRE SEAL | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 10/02/2023 | P-23-024982- New specification.inform about SAP labeling standardization for single wire seal. The change has no impact to form-fit-function. Please see more details in attachment. List of affected PNs is provided as attachment to this PCN. This is an informational PCN and no formal PPAP will be submitted. During the transition phase mixed shipments with both label layout can occur till the date mentioned in this PCN. In case further details are needed about the exact future state label layout, please contact your sales representative. Please provide your statement to this PCN within 2 weeks after receiving of it. | Download | |||
| 01/13/2023 | P-22-023612 - Min order quantity alignment. TE is changing its system as it relates to minimum order quantities for the part numbers listed to address trends that have been recently observed. We have identified situations where quantities can be ordered at quantities below what our standard packaging requirements allow. The situation also results in non-standard handling (break-pack) and creates risks for damage during transit to our customers. Therefore, we are making changes to align minimum order quantities with appropriate standard packaging requirements for these part numbers. | Download | |||
| 01/13/2023 | P-22-023726 - MOQ Change Alignment.TE is changing its system as it relates to minimum order quantities for the part numbers listed to address trends that have been recently observed. We have identified situations where quantities can be ordered at quantities below what our standard packaging requirements allow. The situation also results in non-standard handling (break-pack) and creates risks for damage during transit to our customers. Therefore, we are making changes to align minimum order quantities with appropriate standard packaging requirements for these part numbers. | Download | |||
| 08/05/2022 | P-21-021707 - Product improvement. we hereby inform you about the duplication of a molding tool for the TE component part "MQS BLINDSTOPFEN4MM". Tool build at supplier and serial production at TE San Salvo, As a result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool 21-1959349, which is under construction in order to meet all specification requirements to cover increasing market demand and which will run in addition to the current one. | Download | |||
| 08/01/2022 | P-21-021823 - Manufacturing location change. Duplication tool for the following parts. Following Part Numbers will be transferred from Europe to TE Suzhou China. The product will only ship to Asian-Pacific customer. We will provide the PPAP to Asian-Pacific customer, and will not provide to other country customer | Download | |||
| 01/15/2020 | P-20-018416 - Product Improvement. Change of color paste with slight change on blue color. This change of color paste is intended to standardize our products and our processes and it will not affect Form, Fit and Function of the product as proved and validated. | Download | |||
| 04/19/2019 | P-18-016246 - Tool duplication of a molding tool for the TE part number 967067-1,967067-2,967056-1. | Download | |||
| 04/21/2017 | P-16-013834 - New Tooling. | Download | |||
| 04/11/2016 | P-16-012575 - UPDATE TO PCN P-16-012523. To ensure a smooth and stable transition from SWDC to EPDC, TE will be delaying the transition from the current Santa Teresa, NM DC (SWDC) to the new El Paso, TX DC (EPDC), originally scheduled to implement February 8th - 15th, is now scheduled to implement April 11th - 15th. This delay will allow extended testing on all SAP systems and procedures to ensure a seamless transition into the new warehouse. As we migrate the product and go-live on the new SAP WM software, it is critical to ensure this testing and training is fully incorporated into the systems and operational processes in the new El Paso warehouse. Based on the revised timing of transition, both Customer Shipments and Supplier Deliveries will continue to process from the Santa Teresa, NM location: Address: 101 Lindbergh, Santa Teresa, NM 88008, DUNS Code: 036967748. See attached Customer Letter. | Download | |||
| 02/15/2016 | P-16-012523 - Location Change. TE has established a new Distribution Center in El Paso, TX to support our South-West Customers. The transition to El Paso will take place during the weekend of February 13th - 14th. | Download | |||
| 08/20/2015 | P-15-011803 - Product Improvement. New tool 967056-1. | Download | |||
| 04/28/2014 | P-14-009870 - Document clarification. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
