1410189-4
MULTIGIG RT T2 7RW H-LFT,ET2
The MULTIGIG RT T2 7RW H-LFT,ET2 is a high-performance backplane connector designed for demanding aerospace, defense, and marine applications. With a rugged board mount and through-hole press-fit termination, this connector ensures reliable power and signal transmission in harsh environments. Featuring 56 positions arranged in a 7-row matrix, including 6 power and 4 signal positions per column, it supports data rates up to 12 Gb/s. The fully shrouded, right-angle design with polarization mating alignment offers easy and secure connections, while the durable construction with nickel underplating and matte tin contact plating guarantees a long service life. RoHS compliant and in stock for immediate shipping, the MULTIGIG RT T2 connector is the ideal choice for high-reliability board-to-board applications.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1410189-4 |
| Series: | MULTIGIG RT 2 |
| Amperage: | 1 A |
| Connector Type: | Daughtercard (Plug) |
| Gender: | Plug |
| Number of Rows: | 7 |
| Mount Type: | Board Mount |
| Termination Method: | Through Hole - Press-Fit |
| Contact Material: | Brass, Phosphor Bronze |
| Pitch: | .071 in, 1.8 mm |
| Voltage: | 50 VDC |
| Contact Length: | .055 in, 1.41 mm |
| Row Spacing: | .053 in, 1.35 mm |
| Impedance: | 100 Ω |
| Number of Positions: | 56 |
| Data Rate: | ≤12 Gb/s |
| Mount Orientation: | Right Angle |
| Module Type: | Left |
| GPL: | B54 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Circuit Application: | Power & Signal |
| PCB Retention: | With |
| Contact Underplating Material: | Nickel |
| PCB Contact Termination Area Plating: | Matte Tin |
| PCB Retention Type: | Action/Compliant Pin |
| Sealable: | No |
| Mating Alignment: | With |
| Mating Alignment Type: | Polarization |
| GPL Description: | Aerospace Defense & Marine |
| Connector and Contact Terminate To: | Printed Circuit Board |
| Product Code: | F029 |
| Number of Columns: | 8 |
| Number of Power Positions: | 6 |
| Number of Signal Positions: | 4 |
| Contact Layout: | Matrix |
| Connector System: | Board to Board |
| Connector Product Type: | Daughtercard Connector |
| Pairs Per Column: | 2 |
| Board to Board Configuration: | Right Angle |
| PCB Contact Termination Area Plating Finish: | Matte |
| Make First / Break Last: | Yes |
| Shroud Type: | Fully |
| Post Type: | Board-to-Board |
| PCB Contact Termination Area Plating Thickness: | 20 µin, .5 µm |
| Card Slot Centerline: | 20.3 mm, .8 in |
| Guide Location: | Left |
| Number of Ground Positions: | 11 |
| Durability Rating (Cycles): | 500 Cycles |
| Signal Arrangement: | Differential Signaling & Single Ended |
| Part Aliases: | 1410189-4 |
| SKU: | AMP1410189-4 |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 07/01/2024 | P-24-025925 - Product Improvement. Reducing the wafer slot width of the shroud, from 0.45mm to legacy 0.36mm. This change does not have an impact on performance and does not cause compatibility issues. Previous change increased the slot width to 0.45mm but did not remove the chamfered profile in the slot, which was later determine to be the root cause of the FOD in our assembly process | Download |
| 04/17/2017 | P-17-014050 - Manufacturing location change. Following Part Numbers will be transferred from outside supplier to TE Connectivity manufacturing location in Mt.Joy, Pennsylvania. | Download |
| 05/30/2014 | E-14-007078 - Product Improvement. The EYE OF NEEDLE Tin-Lead Plating change from Sn93-Pb7 To Sn60-Pb40 for TE parts 1410186-3, 1410187-5, 1410189-5, 1410140-3, 1410142-3. There is nothing change on these parts 1410140-1, 1410140-2, 1410142-1, 1410186-1, 1410187-1, 1410187-3, 1410189-3, 1410189-4. | Download |