1410189-3
MULTIGIG RT T2 7RW H-LFT,ET2
The MULTIGIG RT T2 7RW H-LFT,ET2 is a high-performance daughtercard connector featuring 56 contacts in a 7-row configuration. With a durable brass and phosphor bronze construction, it offers reliable power and signal connectivity. Designed for board mount installation with through hole press-fit termination, this connector ensures secure and stable contact. Operating at up to 12 Gb/s with an impedance of 100 Ω, it is ideal for high-speed applications. The right-angle body orientation and half left module type provide versatility in circuit design. With a wide operating temperature range of -55 to 105 °C, it is suitable for aerospace, defense, and marine applications. Fully shrouded and with polarization for mating alignment, this connector guarantees precision and accuracy in every connection. ( 1410189-3)
Details
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1410189-3 |
| Series: | MULTIGIG RT 2 |
| Amperage: | 1 A |
| Connector Type: | Daughtercard (Plug) |
| Gender: | Plug |
| Number of Contacts: | 56 |
| Number of Rows: | 7 |
| Mount Type: | Board Mount |
| Termination Method: | Through Hole - Press-Fit |
| Contact Material: | Brass, Phosphor Bronze |
| Body Orientation: | Right Angle |
| Pitch: | .071 in, 1.8 mm |
| Voltage: | 50 VDC |
| Contact Length: | .055 in, 1.41 mm |
| Row Spacing: | .053 in, 1.35 mm |
| Impedance: | 100 Ω |
| Number of Positions: | 56 |
| Data Rate: | ≤12 Gb/s |
| Mount Orientation: | Right Angle |
| Module Type: | Half Left |
| GPL: | B54 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Circuit Application: | Power & Signal |
| Sealable: | No |
| Mating Alignment: | With |
| Mating Alignment Type: | Polarization |
| GPL Description: | Aerospace Defense & Marine |
| Connector and Contact Terminate To: | Printed Circuit Board |
| Product Code: | F029 |
| Number of Columns: | 8 |
| Number of Power Positions: | 6 |
| Number of Signal Positions: | 4 |
| Contact Layout: | Matrix |
| Connector System: | Board to Board |
| Connector Product Type: | Daughtercard Connector |
| Pairs Per Column: | 2 |
| Board to Board Configuration: | Right Angle |
| Make First / Break Last: | Yes |
| Shroud Type: | Fully |
| Post Type: | Board-to-Board |
| Card Slot Centerline: | 20.3 mm, .8 in |
| Guide Location: | Left |
| Number of Ground Positions: | 11 |
| Signal Arrangement: | Differential Signaling & Single Ended |
| Part Aliases: | 1410189-3 |
| SKU: | AMP1410189-3 |
Frequently bought together
Compliance
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 11/17/2025 | P-25-028147 - Product Improvement. Current Differential Signal wafers have Gold plated ground pads strategically located on non-contact areas of the backside of the wafer. These pads are used for Impedance tuning of the Differential signal pairs on the opposite mating side of the wafer. The Gold and Nickel underplate over the Copper Ground pads will be replaced by extending the existing soldermask material to cover the non-contact areas. See attached photo. Samples have been tested both electrically and mechanically to verify they continue to meet the same performance and are compliant to the TE Product Specification. | Download |
| 08/08/2025 | P-25-028110 - Product improvement. Reduce FOD (Foreign Object Debris) during assembly process. Design of the organizer s mattel pin holes change from hexagon shape to oblong shape to reduce insertion interference between the organizer holes and the shroud s pin during assembly process. This change does not have an impact on performance and does not cause compatibility issues. | Download |
| 04/17/2017 | P-17-014050 - Manufacturing location change. Following Part Numbers will be transferred from outside supplier to TE Connectivity manufacturing location in Mt.Joy, Pennsylvania. | Download |
| 05/30/2014 | E-14-007078 - Product Improvement. The EYE OF NEEDLE Tin-Lead Plating change from Sn93-Pb7 To Sn60-Pb40 for TE parts 1410186-3, 1410187-5, 1410189-5, 1410140-3, 1410142-3. There is nothing change on these parts 1410140-1, 1410140-2, 1410142-1, 1410186-1, 1410187-1, 1410187-3, 1410189-3, 1410189-4. | Download |