750-842

End and intermediate plate; 2.5 mm thick; orange

Vertical jumper; insulated; gray

2-conductor through terminal block; 4 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; gray

Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; 4,00 mm²; gray

2-conductor carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray

Relay module; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 5 A; Railway; Red status indicator; Module width: 20 mm; gray

8-channel digital input; 24 VDC; 3 ms

4-channel analog input; ±10 VDC; Single-ended

4-channel analog input; 0 ... 10 VDC; Single-ended

2-channel analog input; For Pt100/RTD resistance sensors

2-channel relay output; AC 250 V; 2.0 A; Potential-free; 2 make contact

4-channel digital output; 24 VDC; 0.5 A; Low-side switching

8-channel digital output; 24 VDC; 0.5 A

4-channel analog output; 0 ... 10 VDC

End Module

Power Supply; 0 … 230 V AC/DC

Stepper Controller; 24 VDC; 1.5 A

Triple-deck terminal block; Through/through/through terminal block; L/L/L; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray