281-329

Ring Terminal, 12 “ 10 AWG, #10 stud size, funnel entry, nylon insulated, bulk package.

Jumper; 2-way; insulated; light gray

End and intermediate plate; 1 mm thick; orange

Locking lever; orange

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm; silver-colored

Mini-WSB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; white

Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray

2-conductor center terminal block; without push-buttons; 1-pole; 2.5 mm²; CAGE CLAMP®; gray

4-conductor end terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; gray

4-conductor center terminal block; without push-buttons; 1-pole; 2.5 mm²; CAGE CLAMP®; gray

2-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; gray

WMB marking card; as card; MARKED; 1 ... 10 (10x); Horizontal marking; snap-on type; white

WMB marking card; as card; MARKED; 11 ... 20 (10x); Horizontal marking; snap-on type; white

End and intermediate plate; 1 mm thick; gray

Optocoupler module; Nominal input voltage: 12 … 48 VDC; Output voltage range 3 ...53VDC; Limiting continuous current: 4 A; 2-wire connection; Module width: 6 mm; gray

4-conductor through terminal block; 2.5 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; gray

End and intermediate plate; 1 mm thick; orange