216-205

CRIMP SNAP RCPT ASSY,SIZE 1

CLAMP CBL SHELL SIZE 23

CABLE CLAMP ASY, SIZE 11

17-9 CPC RECEPT REV SEX

Circular Connector Receptacle 10 LV-Pin with Solder termination and mechanical alignment key

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 1.12" long x 1.12" wide (28.6 x 28.6 mm) and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties. It is designed for outdoor, high-temperature environments and comes in packages of 100.

Ferrule; Sleeve for 2.5 mm² / AWG 14; uninsulated; electro-tin plated; silver-colored

Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; acc. to DIN 46228, Part 4/09.90; white

Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; gray

Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; red

Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; black

Ferrule; Sleeve for 4 mm² / AWG 12; insulated; electro-tin plated; gray

Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; red

Ferrule; Sleeve for 0.25 mm² / AWG 24; insulated; electro-tin plated; yellow

End and intermediate plate; 2.5 mm thick; gray

4-conductor through terminal block; 2.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; black

End and intermediate plate; 2.5 mm thick; gray