| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | WAGO |
| Manufacturer Part Number: | WAGO 2010-1302 |
| Housing Material: | Nylon |
| Mount Type: | DIN Rail Mount |
| Maximum Operating Temperature: | 105 °C |
| Minimum Operating Temperature: | -60 °C |
| Overall Width: | 0.394 in |
| Overall Height: | 3.504 in |
| Part Aliases: | 20101302 |
| SKU: | WAG2010-1302 |
2010-1302
| ICC Number: | WAG2010-1302 |
| Manufacturer: | WAGO |
| Manufacturer Number: | 2010-1302 |
| Datasheet: | Datasheet |
| ECAD Model: |
Description:
3-conductor through terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; orange
Specifications
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
| WAGO 33465 | TERMINAL,SOLIS R 6 1/4 | ![]() |
| WAGO 36917 | TERMINAL,SOLIS R 1/0 3/8 | ![]() |
| WAGO 63445-2 | FASTON 250 FLAG REC 18-12 AWG TPBR | ![]() |
| WAGO 19164-0039 | Perma-Seal Male Snap Plug for 16-14 AWG Wire, Diameter 4.57mm, Blue, Carton | ![]() |
| WAGO BS18-M | Butt Splice, non-insulated, 22 “ 18 AWG wire range, bulk package. | ![]() |
| WAGO DNF18-250FIB-3K | The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon standard receptacle housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.84" (21.3 mm) long and 0.35" (8.9 mm) wide. The disconnect has a funnel entry barrel configuration and a butted seam barrel. It comes in reels of 3000 pieces. | ![]() |
| WAGO P18-8R-M | Ring Terminal, 22 “ 16 AWG, #8 stud size, non-insulated, bulk package. | ![]() |
| WAGO 2002-1401 | 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray | ![]() |
| WAGO 2002-1402 | 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; orange | ![]() |
| WAGO 2002-1404 | 4-conductor through terminal block; 2.5 mm²; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; blue | ![]() |
| WAGO 2002-1406 | 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; yellow | ![]() |
| WAGO 2002-403 | Jumper; 3-way; insulated; light gray | ![]() |
| WAGO 2004-1403 | 4-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; red | ![]() |
| WAGO 2004-1491 | End and intermediate plate; 1 mm thick; gray | ![]() |
| WAGO 2006-499 | Step-down jumper; from 2006/2004 to 2004/2002/2001 series; from 2206/2204 to 2204/2202/2201 series; insulated; light gray | ![]() |
| WAGO 2016-1307 | 3-conductor ground terminal block; 16 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; green-yellow | ![]() |
| WAGO 216-221 | Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; white | ![]() |


