DT06-08SA-CE05
DT PLUG ASM
The DEUTSCH DT Plug Assembly is a rugged and reliable connector designed for use in industrial and commercial transportation applications. Featuring a housing for female terminals with two rows and a 4.5mm pitch, this connector is IP68 rated for excellent protection against dust and water ingress. With a contact amperage of 13A and 8 positions, it is suitable for power and signal transmission. The PA GF body material ensures durability, while the integrated strain relief helps to maintain cable integrity. Operating in a wide temperature range from -55 to 125°C, this connector is perfect for harsh environments. RoHS compliant and easy to install, the DT Plug Assembly (part number DT06-08SA-CE05) is a cost-effective solution for your connectivity needs.
Details
Product Category: | |
Manufacturer: | TE Connectivity | Deutsch |
Manufacturer Part Number: | TE Connectivity | Deutsch DT06-08SA-CE05 |
Series: | DEUTSCH DT |
Gender: | Housing for female terminals |
Number of Rows: | 2 |
Pitch: | .175 in, 4.5 mm |
IP Rating: | IP68 |
Strain Relief: | Add By Accessory |
Polarization: | No |
Body Material: | PA GF |
Contact Amperage: | 13 A |
Number of Positions: | 8 |
GPL: | J41 |
Packaging: | Package |
Operating Temperature Range: | -55 - 125 °C, -67 - 257 °F |
Circuit Application: | Power & Signal |
Sealable: | Yes |
GPL Description: | Industrial & Commercial Transportation |
Product Code: | Y616 |
Connector System: | Wire to Wire1 |
Length: | 1.465 in |
Cable Exit Angle: | 180° |
Height: | 1.267 in, 32.18 mm |
Width: | .872 in, 22.15 mm |
Body Color: | Gray |
Serviceable: | Yes |
Mating Pin Diameter: | .059 in, 1.5 mm |
Connector Code : | A |
Mounting Feature: | Without |
Terminal Position Assurance: | No |
Hybrid Connector : | No |
Primary Locking Feature: | Integrated in Housing |
Material Flammability Standard: | 20mm Flame Test per Standard UL-94 |
Part Aliases: | DT06-08SA-CE05 |
SKU: | DCNDT06-08SA-CE05 |
Use With
Compliance
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |
Product Change Notice
Product Change Notice
Effective Date | Description of Change | Download |
---|---|---|
11/01/2022 | PCN-22-150129 - Manufacturing Process Change. TE Connectivity is making a change to the molding process from using pre-colored resin to color at the press resin. This change is applicable to all North American manufacturing locations. The affected part numbers are listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. This process allows flexibility and mitigates exposure to material shortages. The natural resin is the same as the pre-colored base resin and V-0 rating. There is no appearance change to parts manufactured with color at the press. | Download |
07/29/2022 | PCN-22-136834 - Adding 4th material source. TE is adding a fourth source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. | Download |
11/18/2021 | PCN-21-121073 - 3RD source material. DT 2 to 12 pin series connectors. The ICT business unit of TEC is releasing a 3rd source material for the part numbers listed below, effectively immediately. We previously shared PCN -21-112194 that indicated we were adding a third source of PA66 material | Download |