| Effective Date | Description of Change | Download |
|---|
| 04/17/2023 | PCN-23-164075 - Adding new material source. TE is adding a new source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.
| Download |
| 11/01/2022 | PCN-22-150129 - Manufacturing Process Change. TE Connectivity is making a change to the molding process from using pre-colored resin to color at the press resin. This change is applicable to all North American manufacturing locations. The affected part numbers are listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. This process allows flexibility and mitigates exposure to material shortages. The natural resin is the same as the pre-colored base resin and V-0 rating. There is no appearance change to parts manufactured with color at the press. | Download |
| 07/29/2022 | PCN-22-136834 - Adding 4th material source. TE is adding a fourth source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. | Download |
| 06/29/2022 | PCN-22-142382 - Drawing Change. The Industrial and Commercial Transportati on Business Unit of TE Connecti vity is Making Change to Supersede DEUTSCH DT Product Drawings in Favor of Generic ones, The change is necessary to consolidate our drawings. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the eld. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipment of Both Configuration may be mixed. | Download |
| 12/22/2021 | PCN-21-112194 - adding a third source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.
| Download |
| 11/18/2021 | PCN-21-121073 - 3RD source material. DT 2 to 12 pin series connectors. The ICT business unit of TEC is releasing a 3rd source material for the part numbers listed below, effectively immediately. We previously shared PCN -21-112194 that indicated we were adding a third source of PA66 material | Download |
| 09/18/2021 | PCN-21-105391 - Process and Packaging Change. TE Connectivity is upgrading the automated assembly machines for the part number(s) listed below. The new equipment s laser will improve the legibility on the cavity ID marking. The affected parts packaging will change to the standard automotive AIAG shape and size boxes with dimensions LxWxH 15.375x9.5x8.563 inches. Standard Package Quantity will not change. Product drawings are not affected. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. | Download |
| 07/09/2021 | E-21-003453 - Product Improvement.TE-ICT will be adding new housing molds to our production capacity in order to meet demand needs and changing features to comply with DT 2 and 3-way appearance and manufacturability requirements. While there is an impact to the part form, the fit and function are not impacted. This change will give manufacturing the option to use the existing molds or the new molds. The second manufacturing location is being added to supply the APAC region. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed. | Download |
| 06/11/2021 | E-21-005858 - Additional Production Manufacturing Location. TE Connectivity is adding new assembly lines for the following part number(s) in Tecate, BC, MX. These PNs are TE proprietary designs, therefore considered catalog/general market product. A Level IV PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.
| Download |
| 08/19/2019 | E-19-007117 - Product Improvement. The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) is making a change to the E-seal grommet color to burnt red.
| Download |
