776228-2

Heilind Number:	AMP776228-2
Manufacturer:	TE Connectivity
Manufacturer Number:	776228-2
Datasheet:	Datasheet
ECAD Model:

Description:

HEADER ASSY, 23 POS VERTICAL

More >>

Specifications

Attribute	Value
Product Category:	Automotive Connectors & Accessories Automotive Connectors
Manufacturer:	TE Connectivity
Manufacturer Part Number:	TE Connectivity 776228-2
Color:	Natural
Series:	AMPSEAL
Number of Rows:	3
Termination Method:	Through Hole - Solder
Maximum Operating Temperature:	100 °C, 105 °C, 149 °F, 158 °F, 167 °F, 176 °F, 185 °F, 194 °F, 212 °F, 221 °F, 65 °C, 70 °C, 75 °C, 80 °C, 85 °C, 90 °C
Pitch:	.157 in, 4 mm
Voltage:	250 VAC
IP Rating:	IP6K9K
Pin Diameter:	.051 in, 1.3 mm
Package Quantity:	1
Number of Positions:	23
Mount Orientation:	Vertical/180°
GPL:	AI3
Operating Temperature Range:	-40 - 105 °C, -40 - 221 °F
Circuit Application:	Power & Signal
Panel Mount:	Without
Shielded:	No
PCB Retention:	Without
PCB Thickness (Recommended):	.062 in, 1.57 mm
PCB Retention Type:	Solder Tail
Sealable:	Yes
GPL Description:	Industrial & Commercial Transportation
Connector and Contact Terminate To:	Printed Circuit Board
Product Code:	J562
Number of Signal Positions:	23
Tab Width:	.051 in, 1.3 mm
Connector System:	Wire to Board, Wire-to-Device
Rated Voltage:	250 VAC
ECCN:	EAR99
Connector Width:	1.264 in, 32.1 mm
PCB Mount Alignment:	With
Length:	2.394 in, 60.8 mm
Locking Interface:	With
Interface Plating:	Tin
Nominal Voltage Architecture:	12 V, 240 V, 24 V, 42 V, 48 V
Mounting Holes:	With
Number of Sections:	1
Tab Thickness:	.051 in, 1.3 mm
Hybrid Header:	No
Profile Height From PCB:	1.348 in, 34.25 mm
Material Flammability Standard:	UL 94V-0
Part Aliases:	776228-2
SKU:	AMP776228-2

Detailed Description

HEADER ASSY, 23 POS VERTICAL, AMPSEAL series, featuring a durable construction with a natural color and UL 94V-0 flammability standard. This through-hole solder termination method connector is designed for reliable performance in harsh environments, with a wide operating temperature range of -40 to 105 °C (-40 to 221 °F). Rated for 250 VAC voltage, it offers IP6K9K ingress protection for dust and high-pressure water. With 23 signal positions and a pitch of 4 mm (.157 in), it is ideal for power and signal applications in industrial and commercial transportation. The connector, part number 776228-2, is RoHS compliant and suitable for wire-to-board or wire-to-device connections, with a compact vertical mount orientation and PCB alignment for easy installation.

Product Change Notice

Effective Date	Description of Change	Download
09/16/2022	PCN-22-149999 - Automated Stitcher Addition. TE Connectivity is making a change to implement an automated stitching process for the assembly of the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market products. Level 4 PPAP will be provided upon request. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP is requested, disposition response is required within 14 days of submit date or it will be considered approved.	Download
05/09/2022	PCN-22-133111 - Tool; Duplication. The Industrial and Commercial Transportation business unit of TE Connectivity is adding new molding, stamping, plating, and assembly capabilities at approved TE vendors in China. This will apply to the vertical and right angle 14P, 23P, & 35P AMPSEAL headers for the part number(s) listed below. This change is necessary to increase production capacity and meet customer demand. The added tooling does not impact connector performance. IMPORTANT: No fit, form or function change. Parts off the new lines are identical to current production.	Download
03/09/2022	PCN-22-128530 - Adding a new capacity seal dispensing line. TE Connectivity is adding a new capacity seal dispensing line for 8P, 14P, 23P, and 35P AMPSEAL headers for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market products. PPAP requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. The new dispense line is necessary to increase production capacity. The added line does not impact connector performance. IMPORTANT: No fit, form, or function change.	Download
10/01/2021	PCN-21-112667 - Internal Plant Move. The Industrial and Commercial Transportation business unit of TE Connectivity is Moving the following part number(s) within the same facility at Empalme Mx. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tool back to prior location/supplier based on business need. PPAP request must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system, only PSW will be provided. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved.	Download
01/31/2019	E-18-019025 - Location Change. This PCN is an addendum to previous AMPSEAL PCN numbers E-18-008460. In an effort to maximize our capacity, our intent is to move the molding of the header housing and the dispensing of the flange seal material on the header assemblies from the current TE molding and assembly manufacturing location to a new single TE manufacturing location in Empalme, Sonora, Mexico. This second TE facility is located in the same compound as the current TE facility.	Download
06/30/2016	P-16-012681 - Product improvement. TE will be changing the material currently used on the Dispense In Place (DIP) seal on the header flange.	Download
12/12/2013	E-13-019438 - Product Improvement.	Download