7-1452668-3
MCON 1.2 LL REC SWS AG
The MCON 1.2 LL REC SWS AG, a high-performance automotive terminal designed for durability and reliability in demanding environments. With a current rating of 16 A, this crimp termination contact features tin plating for enhanced conductivity and corrosion resistance. Operating seamlessly in a wide temperature range from -40 to 150 °C (-40 to 302 °F), it is suitable for use in a variety of automotive, truck, bus, and off-road applications. The F-Crimp design and Locking Lance terminal primary locking feature ensure secure and stable connections, while the receptacle splice type offers easy installation. RoHS compliant and suitable for 20 AWG (.5-.75 mm²) wire sizes, this terminal is a trusted choice for high-reliability automotive connectivity.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 7-1452668-3 |
| Amperage: | 16 A |
| Termination Method: | Crimp |
| Contact Plating: | Tin |
| Operating Temperature Range: | -40 - 150 °C, -40 - 302 °F |
| Wire Size: | 20 AWG, .5 - .75 mm² |
| Crimp Type: | F-Crimp |
| Terminal Primary Locking Feature: | Locking Lance |
| Terminal / Splice Type: | Receptacle |
| Product: | Automotive, Truck, Bus, & Off-Road Terminals |
| SKU: | AMP7-1452668-3 |
| series: | MCON Interconnection System |
| Interface Plating: | Silver (Ag) |
| Mating Tab Thickness: | .6 mm / .024 in |
| Mating Tab Width: | 1.2 mm / .047 in |
| Wire Insulation Diameter: | 1.3 - 1.9 mm / .051 - .074 in |
| Wire Size Search: | 18 AWG / 19 AWG / .5 mm² / .6 mm² / .75 mm² |
| Terminal Transmits: | 0 - 24 A (Low Power) |
| Wire Type: | Copper |
| Sealable: | Yes |
| Receptacle Style: | 180° |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 06/05/2024 | P-24-025663 - Product improvement. tool replacement for below listed PNs according to VDA Trigger Matrix No 13. The manufacturing location remains unchanged. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE, including product validation as per OEM/CAM requirements. Validation will be initiated and completed according to project plan, as soon as samples are available. PPAP will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer 4 weeks before first shipment. In case no request is obtained till above mentioned date, PPAP will be considered as approved, and the change is considered as fully released. | Download |