| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 5748677-1 |
| Series: | AMPLIMITE Kit |
| Accessory Type: | Backshell/Cable Clamp |
| Shell Size: | 1 |
| Package Quantity: | 1 |
| Clamp Type: | Two-Piece RFI/EMI Shield |
| Number of Positions: | 9 |
| GPL: | 252 |
| Shield Plating Material: | Nickel over Copper |
| Shield Plating Finish: | Bright |
| Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
| Shielded: | Yes |
| GPL Description: | Data and Devices |
| Product Code: | 5884 |
| Screw Hole Thread Size: | 4-40 |
| ECCN: | EAR99 |
| Cable Exit Angle: | 180° |
| Cable Insulation Diameter: | .185 - .32 in, 4.7 - 8.13 mm |
| Grommets: | With |
| Cable Clamp Material: | Metal Plated Thermoplastic |
| Grommets Per Set: | 4 |
| Part Aliases: | 5748677-1 |
| Jackscrew Part Number: | 747784-3 |
| SKU: | AMP5748677-1 |
5748677-1
Specifications
Detailed Description
Introducing the PLTD PLST CBL CLMP KIT in size 1, a crucial component for secure cable management in electronic systems. This two-piece RFI/EMI shield clamp, with a nickel over copper plating finish, offers reliable protection and grounding for cables. With nine positions for efficient cable organization, this kit ensures compliance with operating temperature ranges from -55 to 85°C. Featuring grommets and a cable exit angle of 180°, it guarantees a secure and tidy cable installation. RoHS compliant and with a screw hole thread size of 4-40, this Cable Clamp Kit is essential for maintaining signal integrity and minimizing interference in high-performance electronic applications.
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 172167-1 | 4 CIR UNIV M-N-L PLUG |  |
 | TE Connectivity 172168-1 | 6 CIR UNIV M-N-L PLUG | |
 | TE Connectivity 205089-1 | HD 20 PIN CONTACT | |
 | TE Connectivity 205090-1 | HD 20 SOCKET CONTACT | |
 | TE Connectivity 205203-3 | CRIMP SNAP RCPT ASSY,SIZE 1 | |
 | TE Connectivity 205204-4 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205204-9 | CRIMP SNAP PLUG ASSY,SIZE 1 | |
 | TE Connectivity 205206-3 | CRIMP SNAP PLUG ASSY,SIZE 2 | |
 | TE Connectivity 207516-5 | HDP-20,RCPT,SIZE 3, 25 POSN,CL | |
 | TE Connectivity 350777-1 | 02P UMNL PLUG HSG | |
 | TE Connectivity 350779-1 | 04P UMNL PLUG HSG | |
 | TE Connectivity 5-747904-2 | 9 Plug Solder Cup, Gold Flash, | |
 | TE Connectivity 5-747905-2 | 9 Rcpt Solder Cup, Gold Flash, | |
 | TE Connectivity 5206473-3 | SADDLE WASHER,SPECIAL,ZN PLTD | |
 | TE Connectivity 5745171-1 | SIZE 1 ASSY KIT .250 | |
 | TE Connectivity 5747223-3 | AMPLI FEM S'LOCK KIT | |
 | TE Connectivity 5748677-2 | PLTD PLST CBL CLMP KIT,SZ 2 | |
 | TE Connectivity 5748677-3 | PLTD PLST CBL CLMP KIT,SZ 3 | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 01/14/2022 | P-21-021902 - Part status change.The listed part numbers below will be discontinued and no longer available. | Download | |||
| 12/17/2021 | P-21-021927 - Retraction of Obsolete. this PCN is to revise an error previously released on PCN numbers: P-21-021901， P-21-021902， P-21-021903， P-21-021904， P-21-021906， P-21-021907， P-21-021908， P-21-021909， P-21-021910， P-21-021911， The PNs listed below will remain as ACTIVE status and will not be discontinued. These PNs were previously listed on a PCN for discontinuance in error. We sincerely apologize for any confusion this may have caused. Thank you. | Download | |||
| 10/01/2021 | P-21-020809 - Manufacturing Location Change. The Data and Devices business unit of TE Connectivity ( TE ) is moving its current manufacturing site in Hermosillo, MX to a new manufacturing site in the same city of Hermosillo, MX. The new site is only approximately 3.5 mi (equivalent to approximately 5 km) away from the current site. We plan to migrate all the existing manufacturing equipment relating to the products listed below from our current site to the new site. | Download | |||
| 09/01/2020 | P-20-019478 - Manufacturing Location Change. TE is dual sourcing the manufacturing location of the products listed below. Currently the listed products are being produced in the TE Hermosillo, MX. Facility. In the future, parts will be sourced from TE Hermosillo, MX and/or TE Norwood, Mass. USA. Lead times for orders on these part numbers will not be negatively impacted due to this chang | Download | |||
| 05/06/2013 | The Product Compliance Tracking database had errors in it regarding the REACH June 2011 SvHCs for the subject part numbers. Each of the following part numbers contains SvHC 1,2 benzenedicarboxylic acid, di-C6-8- branched alkyl esters, C7-rich (DIHP)(CAS No 71888-89-6)in the following percentages by weight: 5748676-2 0.75%, 5748676-3 1.32%, 5748676-4 1.21%, 5748676-5 1.11 %, 5748677-1 7.5%, 5748677-2 7.5%, 5748677-3 12.3%, 5748677-4 10.8%, and 5748677-5 11.2%. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
