3-1447221-3
S/S CONN REC CONTACT ASSEMBLY
The S/S CONN REC CONTACT ASSEMBLY, a reliable solution for your automotive, truck, bus, and off-road terminal needs. This assembly features a durable construction with a clean body for secure primary locking. With a crimp termination method and F-Crimp type, it ensures easy and efficient installation onto 16-18 AWG wires. The tin contact plating offers excellent conductivity, while the socket splice type guarantees a stable connection. Operating seamlessly in temperatures ranging from -30 to 130°C (-22 to 266°F), this assembly is suitable for a wide range of environments. Rest assured, it is RoHS compliant, meeting high standards of environmental safety. Trust in the performance and quality of this 15A contact assembly for your automotive connectivity requirements.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 3-1447221-3 |
| Amperage: | 15 A |
| Termination Method: | Crimp |
| Contact Plating: | Tin |
| Operating Temperature Range: | -22 - 266 °F, -30 - 130 °C |
| Wire Size: | 16 - 18 AWG, .75 - 1.25 mm² |
| Crimp Type: | F-Crimp |
| Terminal Primary Locking Feature: | Clean Body |
| Terminal / Splice Type: | Socket |
| Product: | Automotive, Truck, Bus, & Off-Road Terminals |
| SKU: | AMP3-1447221-3 |
| series: | SUPERSEAL 1.0mm |
| Seal Type: | Family Seal |
| Interface Plating: | Gold (Au) |
| Mating Pin Diameter: | 1 mm / .039 in |
| Wire Insulation Diameter: | 1.6 - 2.2 mm / .063 - .087 in |
| Wire Size Search: | 16 AWG / 17 AWG / 18 AWG / .75 mm² / .85 mm² / 1 mm² / 1.25 mm² |
| Terminal Transmits: | 0 - 24 A (Low Power) |
| Wire Type: | Copper |
| Sealable: | Yes |
| Receptacle Style: | 180° |
| Part Alias: | 3900187-01 |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 08/23/2023 | PCN-23-176499 - Location Change. TE Connectivity is adding new capacity tooling for Superseal Connector Receptacle Contact Assembly at our existing factory in Suzhou, Jiangsu (China). The material of socket body made in Suzhou is changed from beryllium copper to Cu-Ni-Si alloy which has very similar performance. The tin plating in crimp area of socket body made in Suzhou is changed from bright tin to matte tin. And a dot is added on sleeve for traceability. These PNs are TE proprietary designs, therefore considered as catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are not affected. | Download |
| 05/20/2021 | E-17-007416-C - PCN Cancellation of E-17-007416. Reason for Cancellation: This PCN part and what was needed. | Download |
| 06/28/2018 | E-17-007416 - Product Improvement. Contact body-Material change. | Download |
| 04/28/2014 | P-14-009873 - Document clarification. | Download |