| Effective Date | Description of Change | Download |
|---|
| 05/31/2019 | E-19-000938 - Product Improvement. Item 7, Spacer, part number 1-240641-7 was added. Change was to improve hold down spacing on stripper seal versions of the applicator. | Download |
| 02/28/2019 | E-18-016872 - Product Improvement. OCEAN Applicator 2151500, Item 82, Crimper Spacer, part number 455888-7 was changed. Item 31, Spacer Washer, part number 2119943-1 and item 2, Crimper Spacer, part number 455888-1 was removed. Changes were to improve front bellmouth. No changes necessary to current revision applicator. | Download |
| 12/24/2018 | E-18-011734 - Product Improvement. The following change was made to Ocean Applicator part number 2151500 in order to allow additional clearance for the wire depressor. The following part was added. Item number 31, spacer washer, part number 2119943-1. No change is necessary to the current revision applicator. | Download |
| 05/08/2018 | E-18-003900 - Product Improvement. OCEAN applicator 2151500 has been upgraded to OCEAN 2.0, to include: enhanced terminal strip guide assembly and wire crimp height ram assembly. No change to previous applicator revisions are required. Where listed on the applicator logs-sheet, all terminals have been qualified using the stated crimp specification. In addition, 2266379 is being obsoleted and new versions are being added to 2151500. | Download |
| 04/20/2015 | E-15-002514 - Product Improvement. Changes to Ocean Applicator part numbers 2151019, 2151500, 2151618, and 2151263 in order to match applicators that were built to run on Komax BT752 press. | Download |
| 02/02/2015 | E-14-019124 (XML) - Product Improvement. Ocean Applicator part number 2151062 removed lock washers from terminal hold down mounting screws. ** Ocean Applicator part number 2151500 changed floating shear for better floating shear performance. This was verified by field engineering. | Download |
