| Effective Date | Description of Change | Download |
|---|
| 11/23/2018 | E-18-016264 - Product Improvement. OCEAN applicator 2150049 and 2150536 has been upgraded to OCEAN 2.0, to include: enhanced terminal strip guide assembly and wire crimp height ram assembly. No change to previous applicator revisions are required. Where listed on the applicator logs-sheet, all terminals have been qualified using the stated crimp specification. | Download |
| 06/29/2018 | E-18-001493 - Product improvement. Item 51, Air Feed Pawl, part number 1-2119792-5, item 58, Feed Finger, part number 2063961-8, and item 180 Hold Down Standoff, part number 1752354-5 was changed. Changes were to improve up bend and terminal feeding. No change necessary to current revision applicator. | Download |
| 05/28/2018 | E-17-018281 - Product Improvement. The following changes were made to Ocean Applicator part number 2150049 in order to use the correct front shear depressor block. The following item was added. Item number 77, front shear depressor block, part number 1803203-1. The following item was deleted. Item number 74, crimper spacer, part number 455888-5. To change is necessary to the current revision applicator. | Download |
| 02/21/2017 | E-17-001037 - Product Improvement. Component changes to ocean applicator 2150049 to optimize applicator design. Per applicator drawing, item number 2 changed to a 455888-9 and item number 4 changed to 238011-2. | Download |
