206613-3
RECEPT SZ 23,CPC
The 206613-3, a high-performance CPC Receptacle in size 23. This black connector features a durable PA 6.6 GF housing, with UL 94V-0 flammability rating for enhanced safety. Designed for male contacts, it boasts 22 contact positions for efficient connectivity. The cable mount (free-hanging) termination method, along with straight body orientation, offers versatility in installation. With a voltage rating of 600 V DC and operating temperature range of -55 to 105°C (-67 to 221°F), this connector is suitable for a wide range of applications. RoHS compliant and featuring all-plastic shell construction, it guarantees reliability and durability. Trust in the AMP CPC series for premium circular power connectors.
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 206613-3 |
| Color: | Black |
| Series: | AMP CPC |
| Gender: | Male |
| Housing Material: | PA 6.6 GF |
| Number of Contacts: | 22 |
| Mount Type: | Cable Mount (Free-Hanging) |
| Termination Method: | Crimp |
| Body Orientation: | Straight |
| Voltage: | 600 V DC |
| Shell Size: | 23 |
| Contact Type: | Pin |
| Number of Positions: | 22 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| Shell Type: | All Plastic |
| Product: | Circular Power Connectors |
| Product Type: | Housing |
| Standards Met: | UL 94V-0 |
| Material Flammability Standard: | UL 94V-0 |
| SKU: | AMP206613-3 |
| Number of Signal Positions: | 20 |
| Reverse Numbering: | Without |
| Number of Power Positions: | 2 |
| Reverse Gender: | No |
| Contact Protection: | With |
| Power Conductor Insulation Diameter: | 5.59 mm / .22 in |
| Signal Conductor Insulation Diameter: | 3.81 mm / .15 in |
| Operating Voltage: | 600 VAC |
| null: | 600 VAC |
| Body Orientation: | Straight |
| VDE Tested: | No |
| Mating Alignment Type: | Keyed |
| Mating Retention Type: | Threaded Coupling |
| Screw and Hole Thread Size: | 1-3/8 - 18 UNEF-2A |
| Panel Mount Feature: | Without |
| Mating Alignment: | With |
| Mating Retention: | With |
| Circuit Application: | Power & Signal |
| Shielded: | No |
| Connector and Contact Terminates To: | Wire & Cable |
| Connector System: | Wire-to-Wire |
| Sealable: | No |
| Connector and Housing Type: | Receptacle |
| Fluid Resistance: | None |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 11/10/2021 | E-21-004947 - Product Improvement. Delete the existing AMP logo molded into the housing. Add a molded TE logo close to the molded part number where possible. The molded TE logo and molded part number may be located on any flange edge of receptacles or body of plugs. | Download |
| 11/15/2018 | E-18-006533 - Add laser marking as an option to mark the part number, date code and country of origin to the housings as needed. The markings are currently applied using ink stamping. The laser marking option has the advantage of being more permanent and easier to apply than ink. | Download |
| 04/01/2013 | Project Lantern PTP Migration Parts - MNF. location change from NC. | Download |