2007637-8
SFP+ assy 2x2 Spring Fingers N
The SFP+ assembly featuring a 2x2 configuration with Spring Fingers N for reliable connectivity. This high-speed cage and connector assembly is designed for optimal performance, with a data rate of 16 Gb/s. With four ports and 80 positions, it offers versatility for various applications. The Through Hole - Press-Fit termination method ensures secure attachment to the PCB, even in demanding environments. Operating temperature range of -55 to 105 °C (-67 to 221 °F) makes it suitable for a wide range of conditions. This RoHS compliant product is part of the SFP/SFP+/zSFP+ series, guaranteeing quality and reliability. Upgrade your connectivity with the 2007637-8.
Details
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 2007637-8 |
| Termination Method: | Through Hole - Press-Fit |
| Pitch: | .032 in, 8 mm |
| Number of Ports: | 4 |
| Number of Positions: | 80 |
| Data Rate: | 16 Gb/s |
| Port Matrix Configuration: | 2 x 2 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| PCB Mounting Style: | Through Hole - Press-Fit |
| Product: | SFP/SFP+/zSFP+ |
| Product Type: | Cage Assembly with Integrated Connector |
| SKU: | AMP2007637-8 |
| Contact Mating Area Plating Material: | Gold or Gold Flash over Palladium Nickel |
| Contact Mating Area Plating Thickness: | .76 µm |
| Tail Plating Material: | Tin |
| PCB Thickness (Recommended): | 1.5 mm / .059 in |
| Tail Length: | 3 mm / .118 in |
| Cage Material: | Nickel Silver |
| UL Flammability Rating: | UL 94V-0 |
| Connector Mounting Type: | Board Mount |
| Circuit Application: | Signal |
| Heat Sink Compatible: | No |
| Pluggable I/O Applications: | SFP+ |
| Included Lightpipe: | No |
| EMI Containment Feature Type: | External Springs |
| Connector and Contact Terminates To: | Printed Circuit Board |
| Connector System: | Cable-to-Board |
| Sealable: | No |
| Cage Type: | Stacked |
| Form Factor: | SFP+ |
Application Tooling
Compliance
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 03/14/2016 | E-15-016718 - Non-RoHS PN's are being superseded by their RoHS equivalent PN's. These appear on the same drawings. Minor changes have been made to improve the cage structure. Additional material has been added to the outside walls of the Bottom Cages to add support to the cage walls during initial mounting to the PCB. The design of the locking tabs on the top and bottom of the inner column supports have been changed to lower the finished bend height of the tabs. The tabs on the rear cage wall have been changed from a twist type to a bend type. There is no change to the Fit or Function of parts. Please refer to attached illustrations for details. All Preliminary PN's will be released to Active status. | Download |