| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 2007637-6 |
| Termination Method: | Through Hole - Press-Fit |
| Pitch: | .032 in, 8 mm |
| Number of Ports: | 4 |
| Number of Positions: | 80 |
| Data Rate: | 16 Gb/s |
| Port Matrix Configuration: | 2 x 2 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| PCB Mounting Style: | Through Hole - Press-Fit |
| Product: | SFP/SFP+/zSFP+ |
| Product Type: | Cage Assembly with Integrated Connector |
| SKU: | AMP2007637-6 |
2007637-6
Specifications
Detailed Description
The 2007637-6 is a high-speed SFP+ assembly featuring a compact 2x2 Spring Fingers Inner LP Sn design, perfect for demanding networking applications. With a termination method of Through Hole - Press-Fit and a pitch of .8mm (.032 in), it ensures secure and reliable connectivity. This assembly boasts 4 ports and 80 positions, supporting a data rate of 16 Gb/s for efficient data transmission. Its port matrix configuration of 2x2 enhances versatility in system integration. Operating flawlessly in a wide temperature range from -55 to 105°C (-67 to 221°F), it is suitable for various environmental conditions. Designed for Through Hole - Press-Fit PCB mounting, this SFP+/zSFP+ compatible cage assembly is RoHS compliant, guaranteeing its environmental sustainability. Trust the 2007637-6 for high-performance connectivity in your network infrastructure.
Application Tooling
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 2063048-3 |  |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 02/28/2020 | E-19-018343 - Product Improvement. Change side and top EMI spring to one piece type with laser welding. | Download | |||
| 03/14/2016 | E-15-016718 - Non-RoHS PN's are being superseded by their RoHS equivalent PN's. These appear on the same drawings. Minor changes have been made to improve the cage structure. Additional material has been added to the outside walls of the Bottom Cages to add support to the cage walls during initial mounting to the PCB. The design of the locking tabs on the top and bottom of the inner column supports have been changed to lower the finished bend height of the tabs. The tabs on the rear cage wall have been changed from a twist type to a bend type. There is no change to the Fit or Function of parts. Please refer to attached illustrations for details. All Preliminary PN's will be released to Active status. | Download | |||
Availability
Immediate Shipment:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |
