2007562-7
SFP+assy 2x6 Spring Fingers Outer LP Sn
The 2007562-7, a high-speed SFP+ assembly featuring 2x6 spring fingers for reliable connectivity. This low-profile, press-fit termination method ensures secure installation through the PCB. With 12 ports and 240 positions, this assembly is designed for high-density applications, supporting data rates of up to 16 Gb/s. The 2x6 port matrix configuration offers versatility for various connection needs. Operating in a wide temperature range from -55 to 105 °C, this cage assembly is suitable for demanding environments. RoHS compliant and part of the SFP/SFP+/zSFP+ supplier product line, the 2007562-7 is a reliable solution for high-speed connectivity in your system.
Details
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 2007562-7 |
| Termination Method: | Through Hole - Press-Fit |
| Pitch: | .032 in, 8 mm |
| Number of Ports: | 12 |
| Number of Positions: | 240 |
| Data Rate: | 16 Gb/s |
| Port Matrix Configuration: | 2 x 6 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| PCB Mounting Style: | Through Hole - Press-Fit |
| Product: | SFP/SFP+/zSFP+ |
| Product Type: | Cage Assembly with Integrated Connector |
| SKU: | AMP2007562-7 |
| Lightpipe Configuration: | Single Triangular (Outer) |
| Contact Mating Area Plating Material: | Gold or Gold Flash over Palladium Nickel |
| Contact Mating Area Plating Thickness: | .76 µm |
| Tail Plating Material: | Tin |
| PCB Thickness (Recommended): | 1.5 mm / .059 in |
| Tail Length: | 3 mm / .118 in |
| Cage Material: | Nickel Silver |
| UL Flammability Rating: | UL 94V-0 |
| Connector Mounting Type: | Board Mount |
| Circuit Application: | Signal |
| Heat Sink Compatible: | No |
| Pluggable I/O Applications: | SFP+ |
| Included Lightpipe: | Yes |
| EMI Containment Feature Type: | External Springs |
| Connector and Contact Terminates To: | Printed Circuit Board |
| Connector System: | Cable-to-Board |
| Sealable: | No |
| Integrated Lightpipes: | Yes |
| Cage Type: | Stacked |
| Form Factor: | SFP+ |
Compliance
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 03/14/2016 | E-15-016718 - Non-RoHS PN's are being superseded by their RoHS equivalent PN's. These appear on the same drawings. Minor changes have been made to improve the cage structure. Additional material has been added to the outside walls of the Bottom Cages to add support to the cage walls during initial mounting to the PCB. The design of the locking tabs on the top and bottom of the inner column supports have been changed to lower the finished bend height of the tabs. The tabs on the rear cage wall have been changed from a twist type to a bend type. There is no change to the Fit or Function of parts. Please refer to attached illustrations for details. All Preliminary PN's will be released to Active status. | Download |