The T9AS1D12-5 is a high-performance power relay designed for reliable operation in industrial applications. With a rugged construction and RoHS compliance, this relay offers peace of mind in terms of environmental responsibility. Featuring a single pole with 30A amperage, it is suitable for heavy-duty switching tasks. The printed circuit board mount type and silver cadmium oxide contacts ensure efficient conductivity and longevity. Operating at a coil voltage of 5VDC, this relay is energy efficient while maintaining a wide temperature range from -55 to 85°C (-67 to 185°F). With a 1 Form A (NO) contact arrangement and a maximum switching voltage of 277VAC, the T9AS1D12-5 is a dependable solution for your power relay needs in HVAC and other critical systems.
6000V Initial Surge Withstand Voltage between Contacts & Coil
Packaging Style:
Panel Mount
Product Weight:
26 g / .918 oz
Output Switching:
Random
Contact Current Class:
20 - 30 A / 16 A
Terminal Type:
PCB-THT
Switch Arrangement:
1 Form A (SPST-NO)
Product Height:
20.4 mm / .803 in
Height Class (Mechanical):
25 - 30 mm
Insulation Clearance Between Contact & Coil:
3.18 mm / .125 in
Insulation Clearance Class:
2.5 - 4 mm
Product Length:
32.5 mm / 1.281 in
Length Class (Mechanical):
30 - 35 mm
Product Width:
27.4 mm / 1.079 in
Width Class (Mechanical):
25 - 30 mm
Coil Magnetic System:
Monostable, DC
Coil Power Rating Class:
800 - 1000 mW
Coil Power Rating DC:
1000 mW
Coil Special Features:
UL Coil Insulation Class F
Contact Switching Load (Min):
1000mA @ 5V
Actuating System:
DC
Coil Power Rating:
1 W
Contact Limiting Breaking Current:
30 A
Contact Limiting Continuous Current:
30 A
Contact Limiting Making Current:
30 A
Contact Limiting Short-Time Current:
30 A
Insulation Initial Resistance:
1000 MΩ
Insulation Creepage Between Contact & Coil:
6.36 mm / .25 in
Insulation Creepage Class:
5.5 - 8 mm
Insulation Initial Dielectric Between Adjacent Contacts:
1500 Vrms
Insulation Initial Dielectric Between Coil & Contact Class:
1500 - 2500 V
Insulation Initial Dielectric Between Open Contacts:
1500 Vrms
Insulation Initial Dielectric Between Contacts & Coil:
2500 V / 2500 Vrms
Output Current (Min):
1 A
Output Current Rating:
0 - 30 A / 0 - 30 Arms
Output Voltage Rating (AC Relays):
0 - 240 Vrms
Power Relay Type:
Standard
Enclosure Type:
Sealed
Environmental Ambient Temperature (Max):
85 °C / 185 °F
Environmental Ambient Temperature Class:
70 - 85 °C
Environmental Category of Protection:
RTIII
Supplier Product:
Power Relays
Part Alias:
2-1393210-0
Compliance
Environmental Initiative Details
Environmental Initiative:
RoHS
Compliant:
Unknown
Date of this Information:
Unknown
Notes:
Product Change Notice
Product Change Notice
Effective Date
Description of Change
Download
06/30/2024
PCN-24-201442 - Feature change. please be aware of an upcoming feature change to the listed T9A/T9E part numbers with the new melted sealing technology, there is no impact on the product performance with the change. You can see comparison details in the below PCN images table. Before:1. For the sealed type, the nib is at the top corner of the case normally closed, and use UV glue to seal the vent hole on the base finally. 2. For the vented type, the nib is at the top corner of the case normally closed and the vent hole is at the bottom of the base normally opened . After: 1. For the sealed type, use melting sealing technology to seal the vent hole on the case finally, not use UV glue further and cancel the vent hole on the base. 2. For the vented type, it's a opened nib vent hole and cancel the vent hole on the base.
P-15-011658 - Product Improvement. Cancel the packaging tape change (P-15-011118). Keep the current packaging tape unchanged, don t change the packaging tape from the tear tape to transparent tape.
