| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1410189-1 |
| Series: | MULTIGIG RT 2 |
| Amperage: | 1 A |
| Connector Type: | Daughtercard (Plug) |
| Gender: | Plug |
| Housing Material: | LCP (Liquid Crystal Polymer) |
| Number of Rows: | 7 |
| Mount Type: | Board Mount |
| Termination Method: | Through Hole - Press-Fit |
| Contact Material: | Phosphor Bronze |
| Pitch: | .071 in, 1.8 mm |
| Voltage: | 50 VDC |
| Contact Type: | Pin |
| Contact Length: | 16.08 mm, 2.9 mm, .8 in |
| Row Spacing: | .053 mm, 1.35 in |
| Impedance: | 100 Ω |
| Number of Pairs: | 4 |
| Number of Positions: | 56 |
| Data Rate: | 12.5 Gb/s, ≤12 Gb/s |
| Housing Color: | Black |
| Mount Orientation: | Right Angle |
| Termination Type: | Not Specified |
| Module Type: | Half Left |
| Tail Length: | .055 in, 1.4 mm |
| Circuit Application: | Power & Signal |
| Contact Mating Area Plating: | Gold |
| Contact Mating Area Plating Thickness: | 30 µin, .76 µm |
| PCB Retention: | With |
| Contact Underplating Material: | Nickel |
| PCB Thickness (Recommended): | .062 - .157 in, 1.6 - 4 mm |
| Connector Height: | 18.4 mm, .724 in |
| PCB Retention Type: | Action/Compliant Pin |
| Sealable: | No |
| Mating Alignment: | With |
| Mating Alignment Type: | Guide Slot |
| Connector and Contact Terminate To: | Printed Circuit Board |
| Number of Columns: | 8 |
| Number of Signal Positions: | 16 |
| Preloaded: | Yes |
| Contact Layout: | Inline |
| Connector System: | Board to Board |
| Contact Termination Plating: | Tin-Lead |
| Stackable: | No |
| Connector Product Type: | Daughtercard Connector |
| Pairs Per Column: | 2 |
| Contact Style: | Feed Through |
| Board to Board Configuration: | Right Angle |
| Mating Retention: | With |
| PCB Mount Alignment: | With |
| PCB Mount Alignment Type: | Action/Compliant Tail |
| Make First / Break Last: | Yes |
| Termination Post Length: | .055 in, 1.41 mm |
| Shroud Type: | Fully |
| Post Type: | Through Hole - Press-Fit |
| Type: | With |
| PCB Contact Termination Area Plating Thickness: | 1.27 µm, 50 µin |
| Card Slot Centerline: | 20.3 mm, .8 in |
| Guide Location: | Left |
| Number of Ground Positions: | 11 |
| Contact Mating Area Length: | 15.5 mm |
| Guide Hardware: | With |
| Durability Rating (Cycles): | 500 Cycles |
| Part Aliases: | 1410189-1 |
| SKU: | AMP1410189-1 |
1410189-1
| ICC Number: | AMP1410189-1 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 1410189-1 |
| Datasheet: | 2D Model (DXF) |
| ECAD Model: |
Specifications
Detailed Description
The MULTIGIG RT T2 7RW H-LFT backplane connector, part number 1410189-1, is a high-performance component designed for aerospace, defense, and marine applications. Featuring a rugged board mount construction with through-hole press-fit termination, this connector ensures reliable power and signal transmission in harsh environments. With 56 positions, including 16 signal and 11 ground positions, it offers ample connectivity options. Each contact is gold-plated for enhanced conductivity and corrosion resistance, with a durability rating of 500 cycles. The black LCP housing and fully shrouded design provide added protection, while the 12.5 Gb/s data rate capability meets high-speed transmission requirements. RoHS non-compliant.
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 09/30/2026 | P-26-031489 - Due date Extended. Due date for mixed shipments per TE PCNs P-25-028147 and P-25-028148 has expired. This is to extend the due date to allow mixed shipments of component parts. | Download | |||
| 02/02/2026 | P-26-029646 - Tool Duplication.we hereby inform you about a replacement duplicate stamping tool for the contacts used in the listed part numbers. The validation for this new tool is executed by following a strict procedure, which mitigates risk of negative influence on quality and ability to supply. This is not a Form, Fit, or Function change. An internal release based on our specifications will be executed before any parts are delivered. There is no last date for mix shipment because we will not mix contacts stamped on the old tool die and new tool die in the assemblies. There is no last date for mix shipment because we do not want to mix the contacts in the assemblies from the old die and new die. | Download | |||
| 01/12/2026 | PCN-25-262228 - Drawing Change. On TE Customer Drawing change 1.41 dimension TYP to 1.41 REF. | Download | |||
| 05/30/2014 | E-14-007078 - Product Improvement. The EYE OF NEEDLE Tin-Lead Plating change from Sn93-Pb7 To Sn60-Pb40 for TE parts 1410186-3, 1410187-5, 1410189-5, 1410140-3, 1410142-3. There is nothing change on these parts 1410140-1, 1410140-2, 1410142-1, 1410186-1, 1410187-1, 1410187-3, 1410189-3, 1410189-4. | Download | |||
Availability
In Stock:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |