| Attribute | Value |
|---|---|
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1-967590-1 |
| SKU: | AMP1-967590-1 |
1-967590-1
| Heilind Number: | AMP1-967590-1 |
| Manufacturer: | TE Connectivity |
| Manufacturer Number: | 1-967590-1 |
| ECAD Model: | |
Description:
MCP9.5 BU-KONT EDS
Specifications
Frequently Bought Together
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity PT06E-22-34S | 2,5MM BU-GEH 4P |  |
 | TE Connectivity GCC06DKNN | AMP MCP 2.8, CONTACT SWS | |
 | TE Connectivity 1-968857-1 | AMP MCP 2.8, CONTACT SWS | |
 | TE Connectivity 2-520183-4 | ULTRA-FAST 250 ASY REC 22-18 TPPB | |
 | TE Connectivity 281934-3 | SINGLE WIRE SEAL | |
 | TE Connectivity 282080-1 | AMP SUPERSEAL 1.5 SERIES 2P PL | |
 | TE Connectivity 350783-1 | 12P UMNL CAP HSG | |
 | TE Connectivity 35664 | TERMINAL,SOLIS R 8 1/2 | |
 | TE Connectivity 480053-3 | FF 250 TAB HSG 1P NYLON NAT | |
 | TE Connectivity 480054-3 | FF 250 REC HSG 1P NYLON NAT | |
 | TE Connectivity 51863 | PIDG R 22-16 COMM 22-18 MIL 6 | |
 | TE Connectivity 52291 | TERMINAL R PG 8 5/16 | |
 | TE Connectivity 776429-1 | AS 16, 3P PLUG ASSY, KEY 1 | |
 | TE Connectivity L77TSAH15SOL2C309 | 10P MINI UMNL PLUG HSG | |
 | TE Connectivity 794995-1 | MINI UMNL CAVITY PLUG SEAL | |
 | TE Connectivity 828904-1 | Automotive Seals & Cavity Plugs, Single Wire Seal (SWS), Cavity Diameter .205 in [5.2 mm], Silicone, Poor, 50, Timer Connector System | |
 | TE Connectivity 828905-1 | Automotive Seals & Cavity Plugs, Single Wire Seal (SWS), Cavity Diameter .205 in [5.2 mm], Silicone, Poor, 50, Timer Connector System | |
 | TE Connectivity 828922-1 | 2,5MM CAVITY PLUG FOR 5,4MM DI | |
Application Tooling
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 2151794-2 | | |
 | TE Connectivity 539783-8 | | |
 | TE Connectivity 539783-9 | | |
 | TE Connectivity 539971-1 | | |
 | TE Connectivity 7-2151794-7 | |
For Use With
| Product | Part # | Description | Stock |
|---|---|---|---|
 | TE Connectivity 1355437-1 | | |
 | TE Connectivity 1355437-2 | | |
 | TE Connectivity 1355437-3 | |
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 01/17/2025 | P-24-025876 - Tool Duplication. 1.For China local customer requirement Amp mcp9.5 contact SWS, the copy duplication production tool (11-1978266 ) in TE Suzhou plant for production to Asia-Pacific market. 2.For this new duplication production tool , it will shorten the L/T of delivery time and offer good service for Asia-Pacific market .The identification of Suzhou production part is that there are die - identification marked 4 and TE logo on the part as below， it is on the wrap crimp insulation barrel . 3.The Plate center hole diameter | Download | |||
| 02/20/2024 | P-23-025380 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
| 02/20/2024 | P-23-025381 - MOQ & DU Change. To inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders. | Download | |||
| 07/20/2023 | P-23-024531 - Change to DU & MOQ. change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of July 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. No PPAP will be submitted for this PCN. | Download | |||
| 01/03/2022 | P-21-021668 - Manufacturing Location Change. we hereby inform you about tool and/or process transfers within TE Connectivity. The transfer from TE Montcada(ES) to TE Speyer(DE) follows a strict procedure which fully maintains quality, ability to supply and form-fit-function of concerned products. The receiving manufacturing locations operates under a certified Quality Management System in accordance with standard automotive requirements and respective customer specific requirements. TE Connectivity will and has initiated appointments with our customers to share the details about the upcoming changes and the proposals in terms of notification, validation, release and PPAP scenarios for the different product groups affected. In case any PPAP is required for customer owned tools and / or finished good parts saleable part numbers, we kindly ask you to get in touch with your Sales representative first to achieve a common understanding and agreement on both sides. | Download | |||
| 09/12/2018 | P-18-016277 - Tool duplication of a stamping for below listed TE products. | Download | |||
| 09/12/2018 | P-18-016279 - Document clarification. We hereby inform you about the update of PCN P-18-016277, we only produce PN 1-967588-1 from tool 11-1829294, so PN 1-1355849-1 and PN 1-967590-1 do not produce right now from this tool. | Download | |||
