1-776163-6
35P AMPSEAL HDR ASSY W/GASKET, AU, ORANG
The AMPSEAL 35 Position Connector, with SKU 1-776163-6, is a high-performance automotive component designed for power and signal applications. Featuring a durable orange housing and UL 94V-0 flammability standard, this connector ensures reliable performance in harsh environments. With a termination method of Through Hole-Solder and a pitch of 4mm (.157 in), it offers easy installation on printed circuit boards. Rated for a maximum operating temperature of 125°C (257°F) and a voltage of 250 VAC, it is suitable for demanding automotive systems. The connector, with IP6K9K rating for ingress protection, is shielded for added durability. With 35 signal positions and gold (Au) interface plating, it guarantees excellent signal transmission. The connector, measuring 3.03 inches (76.9 mm) in length and 1.498 inches (37.9 mm) in width, is designed for horizontal/90° mount orientation. It also features boardlock PCB retention and tab width of .051 inches (1.3 mm) for secure connections. This AMPSEAL connector is not RoHS compliant and is currently in stock for immediate shipping.
Details
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1-776163-6 |
| Color: | Orange |
| Series: | AMPSEAL |
| Number of Rows: | 3 |
| Termination Method: | Through Hole - Solder |
| Maximum Operating Temperature: | 100 °C, 105 °C, 149 °F, 158 °F, 167 °F, 176 °F, 185 °F, 194 °F, 212 °F, 221 °F, 230 °F, 248 °F, 257 °F, 65 °C, 70 °C, 75 °C, 80 °C, 85 °C, 90 °C |
| Pitch: | .157 in, 4 mm |
| Voltage: | 250 VAC |
| IP Rating: | IP6K9K |
| Pin Diameter: | .051 in, 1.3 mm |
| Number of Positions: | 35 |
| Mount Orientation: | Horizontal/90° |
| Operating Temperature Range: | -40 - 125 °C, -40 - 257 °F |
| Circuit Application: | Power & Signal |
| Panel Mount: | Without |
| Shielded: | No |
| PCB Retention: | With |
| PCB Thickness (Recommended): | .062 in, 1.57 mm |
| PCB Retention Type: | Boardlock |
| Sealable: | Yes |
| Connector and Contact Terminate To: | Printed Circuit Board |
| Number of Signal Positions: | 35 |
| Tab Width: | .051 in, 1.3 mm |
| Connector System: | Wire to Board, Wire-to-Device |
| Rated Voltage: | 250 VAC |
| Connector Width: | 1.498 in, 37.9 mm |
| PCB Mount Alignment: | With |
| Length: | 3.03 in, 76.9 mm |
| Locking Interface: | With |
| Interface Plating: | Gold (Au) |
| Nominal Voltage Architecture: | 12 V, 240 V, 24 V, 42 V, 48 V |
| Mounting Holes: | With |
| Number of Sections: | 1 |
| Tab Thickness: | .051 in, 1.3 mm |
| Hybrid Header: | No |
| Profile Height From PCB: | 23.6 mm, .929 in |
| Material Flammability Standard: | UL 94V-0 |
| Part Aliases: | 1-776163-6 |
| SKU: | AMP1-776163-6 |
Compliance
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 01/31/2019 | E-18-019025 - Location Change. This PCN is an addendum to previous AMPSEAL PCN numbers E-18-008460. In an effort to maximize our capacity, our intent is to move the molding of the header housing and the dispensing of the flange seal material on the header assemblies from the current TE molding and assembly manufacturing location to a new single TE manufacturing location in Empalme, Sonora, Mexico. This second TE facility is located in the same compound as the current TE facility. | Download |
| 06/30/2016 | P-16-012681 - Product improvement. TE will be changing the material currently used on the Dispense In Place (DIP) seal on the header flange. | Download |
| 03/28/2015 | P-14-009929 - Manufacturing Location Change. | Download |
| 02/03/2014 | P-13-009707 - Manufacturing location change. | Download |