1-2007492-6
SFP+assy2x1 EMI Sprg Inner LP Sn Enhance
The 1-2007492-6, a high-performance SFP+assy2x1 EMI Sprg Inner LP Sn Enhance connector designed for exceptional signal integrity in high-speed networking applications. With a data rate of 16 Gb/s, this connector supports seamless transmission of large volumes of data with minimal loss or interference. Featuring a robust Through Hole - Press-Fit termination method and a pitch of .8 mm, it ensures secure and reliable connectivity on PCBs. The 2 x 1 port matrix configuration offers versatility for different system setups. Operating efficiently in a wide temperature range of -55 to 105 °C, this RoHS-compliant connector is suitable for use in various environmental conditions. Trust in the 1-2007492-6 for your connectivity needs, whether in telecommunications, data centers, or other high-speed networking environments.
Details
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1-2007492-6 |
| Termination Method: | Through Hole - Press-Fit |
| Pitch: | .032 in, 8 mm |
| Number of Ports: | 2 |
| Number of Positions: | 40 |
| Data Rate: | 16 Gb/s |
| Port Matrix Configuration: | 2 x 1 |
| Operating Temperature Range: | -55 - 105 °C, -67 - 221 °F |
| PCB Mounting Style: | Through Hole - Press-Fit |
| Product: | SFP/SFP+/zSFP+ |
| Product Type: | Cage Assembly with Integrated Connector |
| SKU: | AMP1-2007492-6 |
| Lightpipe Configuration: | Single Triangular (Inner) |
| Contact Mating Area Plating Material: | Gold or Gold Flash over Palladium Nickel |
| Contact Mating Area Plating Thickness: | .76 µm |
| Tail Plating Material: | Tin |
| PCB Thickness (Recommended): | 1.5 mm / .059 in |
| Tail Length: | 3 mm / .118 in |
| Cage Material: | Nickel Silver |
| UL Flammability Rating: | UL 94V-0 |
| Connector Mounting Type: | Board Mount |
| Circuit Application: | Signal |
| Heat Sink Compatible: | No |
| Pluggable I/O Applications: | EMI Enhanced |
| Included Lightpipe: | Yes |
| EMI Containment Feature Type: | External Springs |
| Connector and Contact Terminates To: | Printed Circuit Board |
| Connector System: | Cable-to-Board |
| Sealable: | No |
| Integrated Lightpipes: | Yes |
| Cage Type: | Stacked |
| Form Factor: | SFP+ |
Compliance
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
Product Change Notice
Product Change Notice
| Effective Date | Description of Change | Download |
|---|---|---|
| 03/14/2016 | E-15-016718 - Non-RoHS PN's are being superseded by their RoHS equivalent PN's. These appear on the same drawings. Minor changes have been made to improve the cage structure. Additional material has been added to the outside walls of the Bottom Cages to add support to the cage walls during initial mounting to the PCB. The design of the locking tabs on the top and bottom of the inner column supports have been changed to lower the finished bend height of the tabs. The tabs on the rear cage wall have been changed from a twist type to a bend type. There is no change to the Fit or Function of parts. Please refer to attached illustrations for details. All Preliminary PN's will be released to Active status. | Download |