| Attribute | Value |
|---|---|
| Product Category: | |
| Manufacturer: | TE Connectivity |
| Manufacturer Part Number: | TE Connectivity 1-1393210-4 |
| Amperage: | 30 A |
| Mount Type: | Printed Circuit Board |
| Contact Material: | Silver Cadmium Oxide |
| Contact Plating: | Silver Cadmium Oxide (AgCdO) |
| Number of Poles: | 1 |
| Coil Resistance: | 225 Ohm |
| Coil Current: | .067 A |
| Coil Voltage: | 15 VDC |
| Output Type: | AC |
| Maximum Output Voltage: | 240 V |
| Maximum Switching Voltage: | 277 VAC |
| Termination Type: | Printed Circuit Terminals |
| Contact Voltage: | 277 VAC |
| Operating Temperature Range: | -55 - 85 °C, -67 - 185 °F |
| Contact Arrangement: | 1 Form A (NO) |
| SKU: | AMP1-1393210-4 |
1-1393210-4
Specifications
Detailed Description
Introducing the T9AS1D12-15 Power Relay, a high-performance solution for your circuit control needs. With a compact Printed Circuit Board mount type and a single pole, this relay offers reliable switching capabilities. Crafted with Silver Cadmium Oxide (AgCdO) contact material and plating, it ensures durability and longevity. Operating at a coil voltage of 15 VDC and a current of .067 A, it delivers efficient performance. The 1 Form A (NO) contact arrangement, along with a maximum switching voltage of 277 VAC, guarantees seamless operation in demanding environments. With RoHS compliance and a wide operating temperature range of -55 to 85 °C (-67 to 185 °F), this relay is suitable for various applications, from HVAC systems to industrial controls. Upgrade your relay system with the T9AS1D12-15 for dependable and efficient performance.
Product Change Notice
| Effective Date | Description of Change | Download | |||
|---|---|---|---|---|---|
| 06/30/2024 | PCN-24-201442 - Feature change. please be aware of an upcoming feature change to the listed T9A/T9E part numbers with the new melted sealing technology, there is no impact on the product performance with the change. You can see comparison details in the below PCN images table. Before:1. For the sealed type, the nib is at the top corner of the case normally closed, and use UV glue to seal the vent hole on the base finally. 2. For the vented type, the nib is at the top corner of the case normally closed and the vent hole is at the bottom of the base normally opened . After: 1. For the sealed type, use melting sealing technology to seal the vent hole on the case finally, not use UV glue further and cancel the vent hole on the base. 2. For the vented type, it's a opened nib vent hole and cancel the vent hole on the base. | Download | |||
Availability
In Stock:
Call
Stock Location:
In Stock
Factory Stock:
Call for Stock
Factory Lead:
Call
Unit Of Measure:
Each
Minimum/Multiple:
1/1
Invalid quantity value
Documents & Media
Environmental & Export Classifications
| Attribute | Value |
|---|---|
| RoHS Compliant: | Unkown |